Shop

View cart “CC9020 Series Premium Straight Coil Cords Series: 20′ Long – 4mm Snap” has been added to your cart.

Showing all 228 results

ESD Sign – 17″x22″ – “Attention – ESD Control Area” – 5pack

ESD Sign - 17"x 22"
ESD Signs indicate the existence of an ESD Protected Area to personnel prior to entry into the Protected Area. In ESD protected areas, static can cause major damage to sensitive items. Because of
More Info
  • ESD signs notify visitors and workers of the precautions necessary for these areas
  • Sign reads: “Attention – ESD Control Area – Wear Grounding Devices At All Times – This Area Contains Sensitive Electronic Devices”.
  • Designed for long-term use in an electronics production environment.
  • Size: 17″x22″
  • Sold in pack of five posters
  • Made in the United States of America

Add to quote


TM33200 – ESD Tray Liner – 16×24

Line process trays with a durable ESD rubber surface. The ESD tray liners are used to line the surface of process trays to keep items protected and from sliding around. ESD Trays and conductive
More Info
  • Line process trays with an ESD safe surface
  • Provides cushioning and durability
  • Fits a 16″x 24″x 0.060″tray
  • Available in Light Blue, Royal Blue, Gray and Green

ESDC1003C – ESD Curtains

ESD Curtain
Anti-Static and ESD curtains are a great way to separate critical workspaces while also attending to the static-sensitive nature of certain products. Transparent PVC ESD curtains are an
More Info
  • ESD curtains are an ideal barrier wall for sensitive environments.
  • Honeycomb conductive scrim grounds the static charges
  • The curtains are sold in rolls that can be easily converted for your application

Add to quote


WBAS180 ESD Trash Can – 44 Gallon

wbas180 44 gallon esd trash can
Use this 44 gallon ESD trash can safely dispose of materials that pose a danger to spark or discharge and damage static sensitive items. ESD/anti-static trash cans keep charged waste materials
More Info
  • Conductive ESD trash cans remove the static threat of plastic receptacles that can damage sensitive electronic devices.
  • 44 gallon capacity
  • Permanently conductive – will never lose ESD properties
  • ESD symbol in yellow printed on body for easy identification
  • Typical point-to-point resistance: 10^4 – 10^5 ohm

Add to quote


WBAS90 ESD Trash Can – 22 Gallon

wbas90-22-gallon-esd-trash-can
Use this 22 gallon ESD trash can safely dispose of materials that pose a danger to spark or discharge. ESD/anti-static trash cans keep charged waste materials away from sensitive electronic
More Info
  • 22 gallon capacity
  • Permanently conductive – will never lose ESD properties
  • ESD symbol in yellow printed on body for easy identification
  • Typical point-to-point resistance: 10^4 – 10^5 ohm

Add to quote


High Visibility ESD Jackets: Lapel Collar, Three Snap Adjustment Sleeve – Teal

9010-esd-jacket-collar-snap-cuff-model-teal
Transforming Technologies High-Visibility ESD Jackets provide high-quality ESD protection at a great value! 9010 Series jackets are fabricated from lightweight 90% polyester and 10% carbon fabric
More Info
  • High-Visibility Teal color ESD jacket
  • Medium-weight fabric- Perfect for all working environments
  • Extremely durable – Certified “a groundable garment system” after 100 washing cycles
  • Level 3 ESD Jackets – Complies with the highest standards
  • Available in Light Blue, Black, Maroon, Teal and White

ESD Jackets: Medium Weight 9010 Fabric, Lapel Collar, Three Snap Adjustment Sleeve

ESD Jacket with Lapel Collar, Snap Cuff, blue
Transforming Technologies 9010 Series ESD Jackets provide high-quality ESD protection at a great value! 9010 Series jackets are fabricated from light weight 90% polyester and 10% carbon fabric for
More Info
  • Medium-weight ESD jacket – Perfect for all working environments
  • Extremely durable – Certified “a groundable garment system” after 100 washing cycles
  • Level 3 ESD Jackets – Complies with the highest standards
  • Available in Light Blue, Black, Maroon, Teal and White

ESD Jackets: Medium Weight 9010 Fabric, V-Neck, Snap Cuff

9010-all-colors-esd-jacket-v-neck-snap-cuff-model-blue
Medium weight ESD jacket with a V-Neck Collar is perfect for all working environments. Transforming Technologies 9010 Series ESD Jackets provide high-quality ESD protection at a great value! 9010
More Info
  • Medium-weight ESD jacket – Perfect for all working environments
  • V-Neck Collar and Snap Front Enclosure
  • Three Snap Adjustment Sleeve
  • Extremely durable – Still  groundable after 100 washing cycles
  • Level 3 ESD Jackets – Complies with the highest standards
  • Available in Light Blue, Black, and White

ESD Jackets: Medium Weight 9010 Fabric, V-Neck, ESD Knit Cuff

9010 Series ESD jacket V-Neck Knit Cuffs
Medium weight ESD jacket with V-Neck Collar and ESD Knit Cuffs perfect for all working environments. Transforming Technologies 9010 Series ESD Jackets provide high-quality ESD protection at a
More Info
  • Medium-weight ESD jacket – Perfect for all working environments
  • V-Neck Collar and Snap Front Enclosure
  • ESD Cuff allows for “Hands-Free” grounding
  • Extremely durable – Still  groundable after 100 washing cycles
  • Level 3 ESD Jackets – Complies with the highest standards
  • Available in Light Blue, Black, and White

ESD Jackets: Medium Weight 9010 Fabric, ESD Knit Cuff

Medium weight ESD jacket with ESD Knit Cuffs perfect for all working environments. Transforming Technologies 9010 Series ESD Jackets provide high-quality ESD protection at a great value! 9010
More Info
  • Medium-weight ESD jacket – A durable jacket that is perfect for all working environments
  • ESD Cuff allows for “Hands-Free” grounding
  • Extremely durable – Still  groundable after 100 washing cycles
  • Level 3 ESD Jackets – Complies with the highest standards
  • Available in Light Blue, Black, Maroon, Teal and White

ESD Jackets: Lightweight 8812 Fabric, Lapel Collar, Snap Cuff

Lightweight, breathable polyester fabric makes this jacket perfect for warm environments.  The 8812 Lapel Collar jackets are fabricated from light weight 88% polyester and 12% carbon fabric for
More Info
  • Made with lightweight 8812 Series for maximum breathability
  • 3/4ths length jacket cover more clothing
  • Three snap adjustable sleeve
  • Light Blue, White and Maroon

ESD Jackets: Lightweight 8812 Fabric, Lapel Collar, Knit Cuff

Lightweight, breathable fabric makes this jacket perfect for warm environments and ESD Knit Cuffs allow for hands-free grounding.  The 8812 Lapel Collar jackets are fabricated from light weight
More Info
  • Made with lightweight 8812 Series for maximum breathability
  • 3/4ths length jacket cover more clothing
  • ESD Knit Cuff allows for “Hands-Free-Grounding”
  • Light Blue, White and Maroon

ESD Jackets: Lightweight 8812 Fabric, V-Neck Collar, ESD Knit Cuff

Light Weight ESD Jacket Vneck Knit Cuff
A lightweight and breathable V-Neck ESD jacket that keeps you cool and protected while you work and ESD Knit Cuffs allow for hands-free grounding.  The JKC Series 8812 V-Neck Collar jackets are
More Info
  • Made with lightweight 8812 Fabric for maximum breathability
  •  V-neck allows for maximum ventilation
  • 3/4ths length jacket cover more clothing
  • ESD knit cuff allows for “Hands-Free” grounding
  • Light Blue, White and Maroon

ESD Jackets: Lightweight 8812 Fabric, V-Neck Collar, Snap Cuff

A lightweight and breathable ESD jacket that keeps you cool and protected while you work  The JKC Series 8812 V-Neck Collar jackets are fabricated from light weight 88% polyester and 12% carbon
More Info
  • Made with lightweight 8812 Fabric for maximum breathability
  •  V-neck allows for maximum ventilation
  • 3/4ths length jacket cover more clothing
  • Three Snap Adjustment Sleeve
  • Light Blue, White and Maroon

ESD Jackets: V-Neck, Lightweight 8812 Fabric, Short Sleeves

Lightweight and breathable ESD jackets keep you cool and protected while you work  The JKC Series 8812 V-Neck jackets are fabricated from light weight 88% polyester and 12% carbon fabric for
More Info
  • Made with lightweight “8812” polyester fabric
  •  V-neck allows for maximum ventilation
  • Available in Light Blue, White and Maroon

ESD Jackets: Heavy Weight 5049 Fabric, Lapel Collar, ESD Knit Cuff

Heavyweight jacket made with polyester and cotton fabric with lapel collar and ESD knit cuff. Superior workmanship provides reliable panel to panel continuity of the garment. The 5049 Series
More Info
  • Made with heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
  • Waist-length ESD Jackets
  • Three snap cuff for proper sleeve adjustment
  • Conforms to ANSI/ESD 20.20

ESD Jackets: Heavy Weight 5049 Fabric, Lapel Collar, Snap Cuff

Heavyweight jacket made with polyester and cotton fabric with a lapel collar and three snap cuff. Superior workmanship provides reliable panel to panel continuity of the garment. The 5049 Series
More Info
  • Made with heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
  • Waist-length ESD Jackets
  • Three snap cuff for proper sleeve adjustment
  • Conforms to ANSI/ESD 20.20

ESD Cleanroom Frock – White or Navy Blue – ESD Knit Cuffs

High-Performance Garments that Protects Against Airborne Contamination and Static Charges Transforming Technologies ESD Cleanroom Frock is engineered to meet up to a Class 100 clean room demands for
More Info
  • ESD Safe Class 100 Cleanroom Frock
  • Extremely Durable Cleanroom Fabric
  • Contains a Conductive Grid That Reduces Static Generation
  • Full-length lab coat – Covers More Clothing
  • ESD Knit Cuffs
  • Conforms to ANSI/ESD 20.20

ESD Lab Coat: Lapel Collar, Heavyweight 5049 Fabric

Full Length ESD Lab Coat For Static Control
Heavyweight polyester and cotton fabric makes this ESD Lab Coat more comfortable to wear and warmer than polyester ESD smocks. Superior workmanship and reliable panel-to-panel
More Info
  • Heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
  • Full-length lab coat – covers more clothing
  • Three snap cuff for proper sleeve adjustment
  • Conforms to ANSI/ESD 20.20

BFN801 Benchtop Ionizing Blower

bfn801-esd-bench-top-ionizing-blower
The BFN801 provides excellent balance and rapid charge decay for secure ESD workstation protection. The BFN 801 benchtop ionizing blower, with inherently stable AC technology, provides excellent
More Info
  • Excellent static elimination performance
  • Coverage Range: 1Â’ x 5Â’ area
  • Uses AC technology to produce a balanced output of air ions:+10 volt
  • Built-in emitter point cleaner
  • Variable fan speed control
  • Easy to clean and safe to access
  • Removable finger guards with auto shut-off sensor

Add to quote


BFNG10 Ionizing Gun

BFNG10 Ionizing Gun
A high-performance ESD ionizing gun perfect for a wide variety of industrial applications.  The BFNG10 provides excellent balance and rapid charge decay for secure ESD workstation
More Info
  • Excellent static elimination performance
  • Coverage Range: 1Â’ x 5Â’ area
  • Uses AC technology to produce a balanced output of air ions:+10 volt
  • Built-in emitter point cleaner
  • Variable fan speed control
  • Easy to clean and safe to access
  • Removable finger guards with auto shut-off sensor

Add to quote


BFN802 Two Fan Overhead Ionzier with LED Task Light

bfn802-over-head-esd-two-fan-ionizer
The BFN 802 combine excellent ESD performance with user-friendly features to create the premier Overhead ESD workstation solution. The BFN802 ionizer creates a dense and well-balanced ionization
More Info
  • Two fan overhead ionizer that quickly removes static charge
  • Coverage area: 2’x3′
  • Includes energy efficient LED lights
  • Uses AC technology to produce a balanced output of air ions:+10 volt
  • Built-in emitter point cleaner
  • Variable fan speed control
  • Easy to clean and safe to access

Add to quote


WBAS28 ESD Waste Basket – 28 Quart (7 gallon )

ESD trash cans safely dispose of materials that pose a danger to spark or discharge. ESD/anti-static trash cans keep charged waste materials away from sensitive electronic devices and from
More Info
  • 7 gallon capacity
  • Permanently conductive – will never lose ESD properties
  • ESD symbol in yellow printed on body for easy identification
  • Typical point-to-point resistance: 10^4 – 10^5 ohm

Add to quote


WBAS28MET Cleanroom ESD Waste Basket: 28 Quart (7 gallon )

Use this stainless steel 7 gallon waste basket in cleanrooms to safely dispose of materials that pose a danger to spark or discharge. Conductive trash cans keep charged waste materials
More Info
  • Ideal for Cleanrooms and other controlled environments
  • 7-gallon capacity
  • Made with permanently conductive stainless steel
  • Typical point-to-point resistance: 10^2 – 10^3 ohm

Add to quote


CrossFLOW IN3000 Wide Coverage Benchtop Ionizing Blower with Heater

CrossFLOW IN3000-wide-coverage-bench-top-ionzing-esd-blower
Excellent Static Eliminating Performance over a Large 3'x6' coverage area - Includes a heater! The CrossFLOW ionizing blower produces a powerful air flow, rich in positive and negative ions that
More Info
  • Rapid static elimination performance
  • Wide Coverage Range: 3Â’ x 6Â’ area
  • Uses AC technology to produce a inherently balanced output: ±10V
  • Integrated heater
  • Integrated emitter point cleaner
  • Ionization status light

Add to quote


BFN8412 Extended Coverage Bench Top AC Ionizer

BFN8412-long-range-ionizing-blower-heater
High speed, consistent static elimination for an extended 3'x6' coverage area - Includes a heater! The BFN 8412 extended range ionizing blower, with AC technology, provides excellent balance
More Info
  • Excellent static elimination performance
  • Extended Coverage Range: 3Â’ x 6Â’ area
  • Uses AC technology to produce a balanced output of positive and negative air ions.
  • Integrated heater and emitter cleaner for ease of operator use.

Add to quote


BFN803 Three Fan Overhead Ionzier with LED Task Light

bfn803-over-head-esd-three-fan-ionizer
The BFN 803 combine excellent ESD performance with user-friendly features to create the premier Overhead ESD workstation solution. The BFN803 ionizer creates a dense and well-balanced ionization
More Info
  • Three fan overhead ionizer that quickly removes static charge
  • Coverage area: 2’x4′
  • Includes energy efficient LED lights
  • Uses AC technology to produce a balanced output of air ions:+10 volt
  • Built-in emitter point cleaner
  • Variable fan speed control
  • Easy to clean and safe to access

Add to quote


Warmbier EFM51.VK Electrostatic Field Meter Verification Kit

The EFM51WT Walking Test Kit is a hand-held  meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5.   The
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Pocket-size meter
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”
  • Evaluate ionizer efficiency
  • Measure static fields, potentials, and discharge times

Add to quote


Warmbier EFM51.CPS Charge Plate System and Field Meter

The Wolfgang Warmbier EFM51.CPS is used to measure and evaluate an ionizer's efficiency as well as fully functioning field meter. The EFM51 is a full-featured hand-held field meter used to
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Storage bag including ground cable and clip
  • Pocket-size
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”

Add to quote


Warmbier EFM51 Electrostatic Field Meter

The Wolfgang Warmbier EFM51 is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 is a full-featured hand-held field meter used to perform static
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Storage bag including ground cable and clip
  • Pocket-size
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”

Add to quote


Ptec™ IN6430 Ionizing Blow Off Gun

Best-In-Class Design creates precision ionizing performance Transforming Technologies' IN6430 ionizing air gun is a superior static eliminating device that integrates best-in-class AC performance
More Info
  • Point-And-Shoot Precision Ionization
  • Fast Static Decay Times with Excellent Balance
  • Output Nozzle Tips Available to Change Airflow
  • Single Integrated Air/Power Cable with Strain Relief That Protects Cables.
  • Ergonomic Handle Design
  • Filter Available to Ensure Clean Air

Add to quote


Warmbier EFM51WT Field Meter Walking Test Kit

A hand-held meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The electrostatic charge of a person walking on an ESD
More Info
  • Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
  • Measures Voltage Generated on the Body While Walking
  • Handheld, Portable Meter with Conductive Carrying Case
  •  Also is a Fully Functional Field Meter – Measures Static Fields, Potentials and Discharge Times.

Add to quote


Ptec™ IN5140 Bench Top Ionizer

IN5140 Ionizer
Benchtop Blower Ptec™ IN5140 The Ptec™ IN5140 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components
More Info
  • Remove Static Charges Quickly and Efficiently
  • Perfect for Single Station Table Top, Bench or Desk Use
  • Small Footprint – Does Not Take Up Space
  • Adjustment Limiting Design Locks in Correct Air Flow for Each Application
  • Removeable Emitter Point Array and Fan Guards Makes Service and Maintenance a Breeze
  • Standard Products Works on All Power Circuits: 100-240v

Add to quote


Ptec™ IN5110 Bench top Ionizer

Benchtop Blower Ptec™ IN5110 The Ptec™ IN5110 68KHz AC benchtop air ionizer is a small, efficient static elimination device with variable fan speed for protecting electronic components
More Info
  • Remove Static Charges Quickly and Efficiently
  • Perfect for Single Station Table Top, Bench or Desk Use
  • Small Footprint – Does Not Take Up Space
  • Variable Fan Speed
  • Standard Products Works on All Power Circuits: 100-240v

Add to quote


GL4500P – ESD Nylon Inspection Gloves – Palm Coated

Palm coated ESD inspection gloves protect sensitive electronics during assembly and inspection. Transforming Technologies ESD inspection gloves are designed to be worn when handling ESD
More Info
  • ESD inspection gloves won’t leave finger prints or contamination
  • Palm coated with micro-foam polyurethane
  • Seamless nylon and conductive carbon nylon knit.
  • Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
  • Reusable. Machine washable

Warmbier ESD Starter Kit with Field Meter and SRM Meter

A kit to test basic ESD measurements such as surface resistivity and electrostatic fields. A complete and very useful tool kit for testing and measuring different products and materials within an
More Info
  • Quickly and Easily Test Surface Resistivity & Static Fields
  • Portable, Handheld Devices in a Lightweight Conductive Case
  • Takes The Basic Measurements Needed for an ESD Program

Add to quote


Ptec™ IN4200 Airflex Flexible Neck Ionizing Nozzle – Mountable

IN4200
Ionizing nozzle provides pinpoint ionization with hands-free foot peddle operation. The IN4200 flexible nozzle neck frees the operator's  hands during assembly and manufacturing processes. A
More Info
  • Flexible neck allows you to optimally position airflow.
  • Multiple nozzle options to customize airflow for your specific application.
  • Hands-Free operation with foot pedal operation
  • Optional .01 micron filter for clean air
  • Ionization (green) and HV alarm (red) lights.
  • No periodic adjustments.

 

Add to quote


Ptec™ IN4000 Airflex Flexible Neck Ionizing Nozzle

IN4000 Airflex Ionizing Nozzle
Ionizing nozzle provides pinpoint ionization with hands-free foot peddle operation. The IN4000 flexible nozzle neck frees the operator's  hands during assembly and manufacturing processes. A
More Info
  • Flexible neck allows you to optimally position airflow.
  • Multiple nozzle options to customize airflow for your specific application.
  • Hands-Free operation with foot pedal operation
  • Optional .01 micron filter for clean air
  • Ionization (green) and HV alarm (red) lights.
  • No periodic adjustments.

 

Add to quote


GL4500D – ESD Nylon Inspection Gloves – Dot Covered Palm

Dotted palm ESD inspection gloves protect sensitive electronics during assembly and inspection. Transforming Technologies ESD inspection gloves are designed to be worn when handling ESD
More Info
  • ESD inspection gloves won’t leave finger prints or contamination
  • Palms are coated with micro-foam polyurethane dots for grip
  • Seamless nylon and conductive carbon nylon knit.
  • Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
  • Reusable. Machine washable

Warmbier Walking Test Kit WT5000 Electrometer

Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has been designed to perform a voltage
More Info
  • Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
  • Measures Voltage Generated on the Body While Walking
  • Body Voltage is Displayed on Meter as well as Live Via a Computer
  • Easy to use Analysis Software to Save, Measure, Print and Export Tests

Add to quote


GL4500T – ESD Nylon Inspection Gloves – Finger Tip Coated

Finger tip coated ESD inspection gloves protect sensitive electronics during assembly and inspection. Transforming Technologies ESD inspection gloves are designed to be worn when handling ESD
More Info
  • ESD inspection gloves won’t leave fingerprints or contamination
  • Fingertip coated with micro-foam polyurethane
  • Seamless nylon and conductive carbon nylon knit.
  • Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
  • Reusable. Machine washable

Warmbier TF-530 Digital Thermo-Hygrometer

wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier
The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and economical way to track temperature and humidity
More Info
  • Take Precise Temperature and Humidity Measurements
  • One Button Operation
  • Mountable: Built-in 1/4” Tripod Thread
  • Temperature: -30…+70°C (± 0,5°C at -10…+70°C)
  • Humidity: 0 … 100% (± 3% at 20…80%)

Add to quote


Ptec™ IN5130 Three Fan Overhead ESD Ionizer

Ptecâ„¢ Stability The IN5130 overhead ionizing blower combines exceptionally fast static decay capability with excellent balance stability, without taking valuable workspace. Designed to protect
More Info

The IN5130 overhead ionizing blower combines exceptionally fast static decay capability with excellent balance stability, without taking valuable workspace.

Add to quote


GL4500 – ESD Nylon Inspection Gloves – Uncoated

Uncoated ESD inspection gloves protect sensitive electronics during assembly and inspection. Transforming Technologies ESD inspection gloves are designed to be worn when handling ESD susceptible
More Info
  • ESD inspection gloves won’t leave finger prints or contamination
  • Uncoated for maximum breathability
  • Seamless nylon and conductive carbon nylon knit.
  • Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
  • Reusable. Machine washable

Warmbier 7220.45 Hand Probes for Testing ESD Floors

wolfgang-warmbier-hand-probe-7220
The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while
More Info
  • Hand probe are designed to evaluate ESD flooring according to ANSI ESD20.20
  • Made from rugged stainless steel
  • Banana plug socket for connection to the testing meter
  • Compatible with Surface Resistance Meters and Walking Test Kits

Add to quote


Warmbier CL49 Clamp Probes for Testing ESD Garments

The CL49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20. The clamp ensures excellent contact during ESD garment tests such as sleeve-to-sleeve continuity measurements.
More Info
  • Clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20
  • Wide steel clamps ensures excellent contact with fabric
  • Made from rugged stainless steel
  • Banana plug socket for connection to the testing meter

Add to quote


GL9100 Series – Static Safe Hot Gloves – Polyester – 14″

You can have great static control and heat protection in one cleanroom compatible glove. Designed for printed circuit boards, hybrid circuits, semiconductors and other processes, the GL9100
More Info
  • Have static control and heat resistance in one glove
  • Gloves resist up to 302°F(150°C)
  • 100% inner tricot knit polyester fabric liner
  • Clean room safe
  • Cuff mounted Grounding snap

Warmbier Concentric ring probe model 880, with carrying case

The 880 concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The Concentric
More Info
  • A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.
  • Concentric ring with conductive rubber (R < 5 ohm) with silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying case

Warmbier 890 Two Sided Probe

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique
More Info
  • Two-sided probe combines a concentric ring and disk probe
  • Made with conductive plastic containing silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying

Add to quote


FG3900 Series – Nomex® Static Safe Hot Gloves – 16″

Have static protection and heat protection up to 572° F in a clean room compatible glove with the high temperature FG3900 series Nomex® gloves. The FG3900 series Nomex® gloves are
More Info
  • Have static protection and high heat protection in a clean room compatible glove
  • Resists Heat Up to 572F (300C)
  • Made with Heat Resistance Nomex® Fabric with ESD Carbon Yarns
  • Cleanroom Compatible
  • Static Dissipative

Warmbier SRM200 Pocket Digital Surface Resistance Verification Kit

Full-featured digital Surface Resistance Meter with lightweight travel probes, two-point probe, data storage, temperature and humidity testing! SRM200 is a very useful instrument for
More Info
  • Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
  • Test range: 10^3-10^12
  • Stores test data that can be accessed via USB 
  • Measures temperature and humidity
  • Test voltage: 10V/100V(automatic ranging)
  • Built-in resistivity probes
  • Carrying case & calibration certificate included

Add to quote


Warmbier SRM200 Pocket Digital Surface Resistance Meter

Full featured digital Surface Resistance Meter with data storage, temperature and humidity testing! SRM200 is a very useful instrument for checking surface resistance and resistance to ground.
More Info
  • Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
  • Test range: 10^3-10^12
  • Stores test data that can be accessed via USB 
  • Measures temperature and humidity
  • Test voltage: 10V/100V(automatic ranging)
  • Built-in resistivity probes
  • Carrying case & calibration certificate included

Add to quote


FG2600 Series – Nomex® Static Safe Hot Gloves – 11″

Have static protection and heat protection in a clean room compatible glove with the FG2600 series Nomex® gloves. The FG2600 series Nomex® gloves are designed for printed circuit board,
More Info
  • Have static protection and high heat protection in a clean room compatible glove
  • Resists Heat Up to 572F (300C)
  • Made with Nomex® Fabric
  • Cleanroom Compatible
  • Static Dissipative

Warmbier METRISO®B530 Surface Resistance Test Kit

Take quick and accurate ESD measurements of materials with this high resistance testing kit. The Metriso® B530 test kit efficiently measures a wide resistance range and is suitable for
More Info
  • Perform resistance tests to evaluate items for ESD compliance
  • Test range: Low ohmic range: 1 to 10 kOhm – 199 GOhm
  • Comes with 5lb probe set with innovative extension handle
  • Comes in conductive case with handle

Add to quote


MT4500 Series: Two-Layer Rubber ESD Table Mats – 0.080″ Thick

MT4500 Series Two Layer ESD Rubber Matting
Premium 0.080" thick ESD table mats protect your sensitive items as well as your work surface. The MT4500 Series Two-Layer Rubber ESD Table Mat is a made from durable 2-ply rubber. A conductive
More Info
  • Premium 0.080″ thick ESD table mats protect your sensitive items as well as your work surface.
  • Excellent resistance to hot solders, soldering irons and most solvents
  • Available in 50ft rolls or an assortment of Ready-Made Table Mats
  • Colors: Nasa Blue, Royal Blue, Green, and Gray

MT2500 – Two-Layer ESD Rubber Table Mat – 0.060″ Thick

Proven 0.060" thick ESD table matting protects your sensitive items as well as your work surface. The MT2500 series ESD rubber mats are made from proven 0.060" thick 2-ply rubber. A conductive layer
More Info
  • Durable 0.060″ Thick Two Layer Rubber
  • Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
  • Available in 50ft rolls or an Assortment of Ready-Made Table Mats
  • Nasa Blue, Royal Blue, and Gray

MT4000 – Textured Two-Layer ESD Rubber Table Mat – 0.080″ Thick

MT4000 Textured Matting
Textured 0.080" thick ESD table matting provides a non-slip surface for your ESD sensitive items The MT4000-Texture series ESD-safe 2-layer rubber matting is made of 100% co-extruded rubber. The
More Info
  • Durable 0.080″ Thick Two Layer Rubber
  • Non-Slip Textured Surface
  • Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
  • Available in 40ft rolls or an Assortment of Ready-Made Table Mats
  • Nasa Blue, Royal Blue, and Gray

VinylStat A – 3 Layer Premium ESD Table Mat

VinylStat A is made from a solid homogeneous vinyl with a buried conductive layer. Colors: Blue or Gray Available in 50ft rolls or pre-cut table
More Info

VinylStat A is the ultimate in static dissipative flexible surfaces. A solid vinyl, homogeneous construction with a buried conductive layer gives VinylStat A its superior physical and unsurpassed electrical qualities.


VinylStat C – Homogeneous Vinly ESD Table Mat

Single layer vinyl homogeneous ESD work surface mat is great for general use. A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent,
More Info

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent, controlled static drain and physical properties with highest level of protection.


VinylStat D – Homogeneous Vinyl ESD Table Mat – 0.0625″ Thick

Single layer vinyl homogeneous ESD work surface mat is great for general use. A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent,
More Info

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat D a consistent, controlled static drain and physical properties with highest level of protection.


VinylStat E – 3 Layer Table Mat w/ Foam Back – 0.375″ Thickness

VinylStatE-three-layer-esd-vinly-foam-mat
Vinyl ESD work surface matting with a foam back that provides extra cushion. Designed for use at workstations and other manufacturing areas, the three layer VME Vinyl serves a dual purpose: the
More Info
  • Provides extra cushion for component safety and operator comfort.
  • Thickness: 0.375″
  • Three layers vinyl with excellent ESD protection
  • Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
  • Light Blue
  • Available in rolls or cut mats

IDP-STAT® MT5500 Series: Cleanroom ESD Table Mats

Protect your sensitive items with this ultra-clean, particle-free, permanently static dissipative cleanroom ESD matting. The IDP-STAT 5500 series utilizes a patented inherently static dissipative
More Info
  • Extremely durable ESD mat that protects your sensitive items as well as your work surface
  • Compatible with  cleanrooms: Ultra-low outgassing, non-VOC, non-blooming and No Particle Generation
  • Made with IDP-STAT Alloy a permanently dissipative elastomer for consistent resistance for the life of the mat
  • Available in 75ft rolls or an assortment of ready-made table mats
  • Transparent – can be used as softwalls to separate work areas in controlled environments such as cleanroom and data centers

MT4500 Series: Two-Layer ESD Rubber Table Cut Mats

MT-blue-ESD-mat
Premium 0.080" thick ESD table matting protects your sensitive items as well as your work surface. The MT4500 Series ESD Two-Layer Rubber ESD Table Mat is a made of a durable 2-ply rubber. A
More Info
  • Available in Various Sizes of Ready-Made Table Mats
  • Durable 0.080″ Thick Two Layer Rubber
  • Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
  • Nasa Blue, Royal Blue, Green, and Gray

Add to quote


ESD Table Mat Kits – Wrist Strap, Mat and Ground Cord

ESD Table Mat
ESD table mat kits include everything you need for to set up an ESD safe workstation. ESD mat kits are excellent for use in assembly environments service and repair operations or any application
More Info
  • Comes with Everything Necessary for a Static Safe Work Area
  • Durable 0.080″ Thick Two Layer Rubber
  • Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
  • Nasa Blue, Royal Blue, Green, and Gray

Warmbier 15 Glove Probe

Probe used to take accurate resistance measurements of ESD Gloves. Model# 15 Glove probe is designed to evaluate ESD gloves according to ANSI ESD20.20. The probe’s weight ensures excellent
More Info
  • Ensures Excellent Contact During Evaluations of ESD Gloves
  • Rugged Metal Probe
  • 4mm Banana Plug Socket Connection
  • For Use With Resistance Meters

Add to quote


SRM330 Lightweight Travel Surface Resistance Meter Kit

The ultimate travel kit for testing materials for electrical resistivity/resistance - Lightweight and portable! The battery powered SRM330 is equipped with built-in parallel electrodes for quick
More Info
  • Easy-to-read color coded readout screen
  • Two lightweight “Press & Test” travel electrodes
  • Built in resistivity probes
  • Automatic test voltage selector
  • Carrying case

Add to quote


SRM310 Pocket Digital Surface Resistance Test Kit

Pocket-sized, battery-powered Surface Resistance Meter is easy to use, transport and test. This SRM 310 uses built-in parallel electrodes to accurately measure electrical resistance  for
More Info
  • Pocket-Sized Digital Surface Resistance Test Kit
  • Test range: 10^3-10^12
  • Test voltage: 10V/100V(automatic ranging)
  • Accuracy + 5%
  • Built-in resistivity probes
  • Carrying bag

Add to quote


VinylStat B – 3 Layer Table Mat w/ Foam Back

Vinyl ESD work surface matting with a foam back that provides extra cushion. VinylStatB provides excellent ESD protection and extra cushion for component safety and operator comfort. VMB utilizes
More Info
  • Provides extra cushion for component safety and operator comfort.
  • Three layers vinyl with excellent ESD protection
  • Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
  • Light Blue or Gray
  • Available in rolls or cut mats

SRM500K Digital Surface Resistance Test Kit

The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC,
More Info
  • Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance
  • 10v and 100v range voltage selection
  • Automatic zeroing and power shut off
  • Tests temperature and humidity
  • Two 5 lb disk probes
  • Built-in resistivity probes
  • Carrying case

Add to quote


FM5 ComfortDOME ESD Anti-Fatigue Mats

Energizing ComfortDOME anti-fatigue mat provides unparalleled comfort in areas where static is a concern The ComfortDOME flooring system is a range of individual mats and modular flooring that
More Info
  • Provides an Anti-Fatigue, Energizing Surface to Stand On.
  • Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance.
  • Available in single work area mats- sizes: 2’x3′ or 3’x4′ or in interlocking sections for long assembly lines.
  • The mat is 1/2″ thick.
  • 100% Conductive Rubber Complies with ANSI ESD20.20

VinylSTAT FM4 – Rigid ESD Vinyl Floor Runner and Chair Mat

VinylSTAT FM4
The VinylSTAT FM4 ESD floor runners and chair mats provide superior ESD properties along with the rigidity needed for today's office or manufacturing envi-ronment.The ESD Chair Mats are made of
More Info
  • Durable vinyl mat provides a rigid ESD floor runner or chair mat
  • Specially spaced diamond treads on the surface of the mat provide excellent traction
  • Available full rolls or floor runners in custom lengths
  • Wide beveled borders to promote safety
  • Surface Resistivity is 10^8 – 10^9.

FM9 ComfortTREAD Diamond-Plate Anti-Fatigue ESD Mat

ComfortTREAD ESD Runners quickly snap together to create ergonomic anti-fatigue floor with excellent traction.  ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable
More Info
  • Provides an Anti-Fatigue, Energizing Surface to Stand On.
  • Specially spaced diamond treads on the surface of the mat provide excellent traction
  • Available in interlocking sections to create runners in custom lengths
  • Wide beveled borders to promote safety
  • 100% Conductive Rubber Complies with ANSI ESD20.20

Warmbier METRISO® B530 ESD Audit Kit

The METRISO® B530  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for qualification /
More Info

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

  • Measure electrostatic fields
  • Measure surface resistance
  • Analyze ionizers performance
  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure temperature and relative humidity

Add to quote


Warmbier METRISO® 3000 ESD Audit Kit

The METRISO® 3000  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for qualification /
More Info

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

  • Measure electrostatic fields
  • Measure surface resistance
  • Analyze ionizers performance
  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure temperature and relative humidity

Add to quote


Warmbier METRISO® 3000 High Resistance Test Kit

A Surface Resistance Test Kit capable of measuring a wide resistance range and complete the tests required for an ESD protection plan. The METRISO 3000 test kit measures a wide range of
More Info
  • Perform resistance tests to evaluate items for ESD compliance
  • Test range: Low ohmic range: 1 to 10 kOhm
    High ohmic range: 1 KOhm to 1.2 TOhm
  • Store up to 50,000 test values and create reports with included software
  • Results displays on LCD screen
  • Comes with 5lb probe set and hand probe
  • Comes in conductive case with handle
  • Tests Temperature and Humidity

Add to quote


VinylStat FM2 ESD Anti-Fatigue Floor Matting

VinylStat FM2 anti-fatigue matting provides a cushioning anti-fatigue surface to stand as well as grounding the person at the same time. VinylStat FM2 is constructed with a closed-cell expanded
More Info
  • Reduces worker discomfort by providing a soft surface to stand on.
  • Provides a path-to-ground for ESD footwear
  • Available in workstation mats, or full rolls for long runners
  • High grade 3/8″ thick closed cell PVC sponge for comfort and durability.
  • Available in gray or brown

EFM115 Electrostatic Field Meter and Ion Balance Tester

The EFM115 is a convenient electrostatic field meter used to locate and measure static charges and test the balance of air ionizers. Static Field Meter  Its compact design and four button
More Info
  • Combination static field meter and ion balance tester
  • Four button operation
  • Digital display with numerical readout and bar graphs
  • Two LED guide ring lights help position the field meter
  • Pocket-size
  • Meets ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

Add to quote


CAL1000 – Calibration Verification Device

CAL1000
The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to
More Info
  • Verify ESD meters are calibrated and in proper working order
  • Precision resistor box
  • Passive – Does not require power
  • Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others.

Add to quote


FM6 ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats

ComfortGEL ESD Anti-Fatigue Mats provides maximum softness and cushioning while  Transforming Technologies ComfortGEL ESD Anti-Fatigue mat prevents worker fatigue in controlled environments.
More Info
  • Made with rubberized gel foam for maximum softness and cushioning
  • Exceptional comfort and long-term performance
  • Static dissipative
  • Specially formulated antimicrobial and antibacterial material to promote cleanliness
  • Washable to clean room level 100

PDT78PV – Verification Unit for the PDT700K and PDT800K

PDT78PV
Verify that the PDT700K and PDT800K combo tester are operating correctly. The PDT700K and PDT800K are factory calibrated and annual calibration is not necessary. The PDT78PV verification
More Info
  • Verify that the PDT700K and PDT800K combo tester are operating correctly.
  • Resistance Box with Fixed 5% Precision Resistors
  • Selectable Test Range of 100K~1G.

Add to quote


PDT800K Deluxe “Near -Fail” Combo Wrist Strap and Footwear Testing Station

Easy, accurate, and time-saving one-touch digital wrist strap and footwear tester with “Near-Fail” alert that tells you when you are nearing failing levels. What makes the PDT
More Info
  • “Near-Fail” LED Indicator.
  • LCD Readout Screen Gives Actual Test Result Number.
  • Tests Wrist only; Foot only; or Both Wrist and Foot.
  • 100% Independently Test the Left-Foot and the Right-Foot.
  • Selectable Test Range of 100K~1G.

Add to quote


Model 282CPS Charge Plate Monitor Convertor for 282 Static Meters

The 282CPS Charge Plate System is an accessory for the 282 Field meter that permits the 282 to measure ionizer performance. Increase the utility of your 282 Electrostatic Fieldmeter by adding the
More Info
  •  An accessory for the model 282 Fieldmeter that permits the model 282 to measure ionizer performance.
  • Lowest-cost test method for periodic verification of ionizers
  • Correlates closely to charged-plate monitor test results
  • Performs both positive and negative decay tests
  • Also works with Model 281

Add to quote


VinylSTAT FM3 Dissipative V-groove Vinyl ESD Matting

VinylSTAT FM3 Floor Matting
This dissipative ESD floor runner has a non-slip, grooved surface that provides excellent traction and allows the mat to be easily cleaned. V-groove floor runner mats can reduce slips and falls by
More Info
  • A v-groove emboss provides a non-slip surface that provides excellent traction
  • Provides a dissipative ESD surface that protects the floor beneth.
  • Very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection.
  •  1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.

FM10 GrooveSTAT Conductive V-Groove Rubber Matting

This conductive ESD floor runner has a non-slip, grooved surface that provides excellent traction and allows the mat to be easily cleaned. A v-groove emboss provides a non-slip surface that
More Info
  • A ribbed emboss provides a non-slip surface that provides excellent traction
  • Provides the electrical properties specified by ESDA standards for floor mats.
  • Very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection.
  •  1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.

FM8 TileSTAT Interlocking ESD Rubber Anti-FatigueTiles – 3’x3′

Create custom ESD floors or runners with modular 3'x3' ESD anti-fatigue tiles. TileSTAT ESD anti-fatigue mats are a heavy duty, durable safety mat constructed of conductive nitrile rubber for use
More Info
  • Heavy duty, durable ESD mat constructed of conductive nitrile rubber
  • For use in general use or harshest environments.
  • Solid pebble embossed surface for improved traction
  • 3ft x 3ft interlocking mats fit together like a puzzle to create custom ESD workstations or complete room systems.
  • The mats can be quickly dismantled to make moving and cleaning easy.
  • Optional 3″ wide beveled borders can be added to the mats.

Add to quote


FM11 PV Series Industrial ESD Interlocking Tile Floor Mats

Low-compression ESD floor tiles for industrial environments. The PV Series Comfort matting is structurally robust and is capable of tolerating the heavy loads and harsh conditions associated with
More Info
  • Low-compression ESD modular tile – 20″x20″x1″
  • Capable of tolerating the heavy loads and harsh conditions associated with industrial environments
  • Diamond-plate emboss surface
  • Optional yellow beveled borders for visibility and safety

Add to quote


Model 287A Charge Plate Monitors to Test Ionizer Performance

The Model 287A is a low-cost and highly portable alternative to a charged-plate monitor for periodic verification of ionzer performance. It permits ionizer testing at the work location without the
More Info
  • All-in-One Instrument for testing Ionizers
  • Measures, displays and stores voltage, decay time, temperature and humidity
  • Exceeds current requirements of ESD Assn. SP3.3 for Periodic Verification of Air Ionizers
  • Test Balance and Decay
  • Low Cost / Performance Ratio
  • Hand-held, Battery Operated
  • Built -in Self Test

Add to quote


CM400 – Single Wire Continuous Monitor, One Operator Only

A single wire constant monitor for one wrist strap only. The CM400, single wire monitoring products continuously check the total ground loop, including the operator, the wrist band and the coil
More Info
  • Continuously Checks One Single Wire Wrist Strap
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


PDT700K – Near -Fail” Combination Wrist Strap and Footear Testing Station

Easy, accurate, and time-saving one-touch digital wrist strap and footwear tester with "Near-Fail" alert that tells you when you are nearing failing levels. What makes the PDT 700K unique is
More Info
  • “Near-Fail” LED Indicator.
  • Tests Wrist only; Foot only; or Both Wrist and Foot.
  • 100% Independently Test the Left-Foot and the Right-Foot.
  • Selectable Test Range of 100K~1G.

Add to quote


CM410 – Single Wire Continuous Monitor, One Operator, One Workstation Mat

A single wire constant monitor for one wrist strap and one worksurface. The CM410 single wire monitor continuously checks the total ground loop, including the operator, the wrist band, the coil
More Info
  • Monitors One Operator and One Workstation Mat
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


GTS900K Premium Combination Wrist Strap and Footear Testing Station

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test
More Info
  • Tests both ESD wrists straps and ESD footwear such as shoes and heel grounders to determine if the grounding device is functioning correctly.
  • Split footplate design test both feet simultaneously and independently
  • Durable sleek black frame and molded footplate
  • Wrist Strap Range 750 kilohm –10 megohm
  • Footwear Range 750 kilohm – 100 megohm*
  • Gives both Low and High failure alarm modes
  • This tester fully supports the “Compliance Verification Plan” requirements as stated in the ANSI ESD S20.20.

Add to quote


CM420 – Single Wire Continuous Monitor, Two Operators, One Workstation Mat

A single wire constant monitor for two wrist straps and one worksurface.  The CM420, single wire constant monitor continuously checks two operators wrist straps and a workstation ground and
More Info
  • Monitors Two Operators and One Workstation Mat
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


StaticAIRE Still Air Ionizer – Model IN1000

Eliminate Static in confined areas without airflow with the StaticAIRE still air ionizer The StaticAIRE Still Air Ionizer quickly and effectively eliminates static without using airflow.
More Info

 

  • Quickly Eliminate Static Charges in Localized Areas without Airflow
  • Effective ionization range: 12″
  • Ideal Where Space Is Limited and Installed Inside Equipment
  • Easy Adjustment and Calibration

Add to quote


GTS600 Combination Wrist Strap and Footear Testing Station

The GST600 tester is a space-saving, versatile combo grounding tester that allows for accurate and cost effective testing of ESD ground devices. The GTS600 is the best value combination tester on
More Info
  • Provides accuracy and reliability at the best value
  • Dual test circuits: test footwear or wrist straps
  • Positive rocker switch LED’s lights and audible alarm signal test results
  • Battery powered with low-battery indicator
  • Provided with NIST traceable certificate

Add to quote


RangerONE Dual Wire Constant Monitor – Model CM1601

Dependable and accurate dual wire monitor for one person. The RangerOne is an extremely sensitive monitor that accurately measures the electrical resistance of an ESD wrist band and signals if the
More Info
  • Monitors one dual wire wrist strap
  • Uses resistance based monitoring technology
  • Easy to use and economical
  • Audible and visual alarm indicators

Add to quote


RangerTWO Dual Wire Constant Monitor – Model CM1602

CM1602-resistance-ranger-dual-wire-constant-monitor
Dependable and accurate dual wire monitor for one person and one work surface. The Resistance Ranger Series is the most reliable workstation monitoring system available. The extremely sensitive
More Info
  • Monitors one dual wire wrist strap and one worksurface
  • Uses resistance based monitoring technology
  • Easy to use and economical
  • Audible and visual alarm indicators

Add to quote


RangerPRO Dual Wire Constant Monitor – CM1600

Versatile, Dependable, and Accurate Resistance Based Constant Monitor System The RangerPRO constant monitor is the premiere workstation grounding system available. A continuous pulse of an
More Info
  • Monitors: Two wrist straps; Two work surfaces; Two auxiliary grounds
  • Accurate dual conductor resistance monitoring technology
  • Ultra-low voltage signal
  • Conductive ESD-safe case
  • Audible and visual alarms
  • Calibration certificate included
  • For use with Dual Wire Wrist Straps

Add to quote


RangerNET Dual Wire Constant Monitor – Model CM2815

A network read dual wire constant monitor for two people and two work surfaces with data logging capabilities Transforming Technologies' RangerNET constant monitor is the premiere work station
More Info
  • Monitors two dual wire wrist straps and two worksurfaces
  • Uses resistance based monitoring technology
  • Ultra-low voltage signal
  • Conductive metal case
  • Audible and visual alarm indicators
  • Network-ready for use in the Boss-See system

Add to quote


Warmbier PGT120.COM Combination Tester With Data Collection

A complete test station for ESD footwear and wrist straps with data collection The PGT120.COM personnel grounding tester takes quick and accurate resistance measurements of the ESD grounding
More Info
  • A “Smart” ESD Combo tester that integrates with a computer to record test results into a database
  • Can work with many other devices such as door/barrier system, label printer, RFID and more
  • Independently test footwear & wrist strap grounding products
  • Automatically test footwear in hands-free mode
  • 100volt test circuit (by default) which is the same voltage used for qualification tests.

Add to quote


RangerBOSS Dual Wire Constant Monitor – Model CM2800

A network ready dual wire constant monitor for two people and two work surfaces with adjustable alarm limits, and data logging capabilities.  The RangerBOSS dual conductor workstation monitor
More Info
  • Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage
  • Uses resistance based monitoring technology
  • Ultra-low voltage signal
  • Conductive metal case
  • Alarms are selectable with software
  • Network-ready for use in the Boss-See system

Add to quote


Warmbier PGT120 Combination Tester for Personal Grounding Equiptment

The PGT120 is an easy to use and complete test station for ESD shoes and wrist straps. The personnel grounding tester is able to perform a quick and accurate control measurement of the ESD
More Info
  • Quickly and easily test ESD footwear and wrist straps
  • Can test ESD footwear hands-free by just stepping on the footplate
  • Audibly and visually signal a “Pass”, “High-Fail” or “Low-Fail”
  • Tests both feet simultaneously and independently to save time
  • Can be integrated with turnstiles and other barrier systems.
  • 100volt test circuit (by default) which is the same voltage used for qualification tests.

Add to quote


CM2015 Periodic Verification Tool

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade
More Info
  • Periodic Verification Tool for the Resistance Ranger Constant Monitors
  • Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications
  • Resistor Box Containing 5% Fixed Precision Resistors

CM410PV – Periodic Verification Tool For CM400 and CM410

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a
More Info
  • Periodic Verification Tool For CM400 and CM410
  • Verfies that the constant monitor is in proper working order.
  • Factory calibrated.  No recalibration required.
  • Comes with Certificate.

Add to quote


CM420PV – Periodic Verification Tool For CM420

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a
More Info
  • Periodic Verification Tool For CM420 Constant Monitor
  • Simulates Passing / Failing Wrist Straps and Worksurfaces
  • The Tool Verifies That The Constant Monitors Are Working Properly

Add to quote


Resistance Ranger Metal Wrist Strap Remote Jack

Metal Remote Jack
Replace your plastic Resistance Ranger Constant Monitor wrist strap remote jack with a metal jack. Works with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from
More Info
  • Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor
  • More durable than plastic version

Add to quote


CP3000 parking jack for Dual Wire Constant Monitors and Wrist Straps

The CP3000 parking station for dual conductor wrist straps provides the user with a jack that will allow an operator to disconnect and leave the dual conductor cord at the workstation without the
More Info
  • Provides a jack to “park” your wrist strap when you need to leave the workstation
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

Add to quote


CYCLOPS operator presence sensors

The CYCLOPS will cause an alarm if an operator approaches the workstation without connecting their wrist strap CYCLOPS™ operator presence sensors, from Transforming Technologies, assure
More Info
  • CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor
  • Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap
  • Assure compliance with personnel grounding requirements and protect ESD safe workstations
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

Add to quote


LB9191 / LB9201 ESD Label

ESD Label printed with "Caution Computer Material Enclosed Do Not Bend or Expose To X-Rays. Excessive Heat, Cold or Humidity Radioactive Materials. Static Electricity of Magnets. Exposure To Any
More Info
  • ESD label printed with “Caution Computer Material Enclosed Do Not Bend or Expose To X-Rays. Excessive Heat, Cold or Humidity Radioactive Materials. Static Electricity of Magnets. Exposure To Any Of The Above May Destroy Contents”
  • Size: 1-1/2″ x 3″, 3″ x 5 “
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9170 / LB9180 ESD Label

ESD Label printed with "Attention Contents Static Sensitive Handling Precautions Required" The LB9107 yellow paper attention label that comes on a 500 count roll. The permanent acrylic adhesive
More Info
  • ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required”
  • Size: 1-3/4″ x 2-1/2″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9141 / LB9142 ESD Label

ESD Label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations” The LB9141 and LB9142 orange paper attention label comes on a 500 count roll. The
More Info
  • ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations”
  • Size: 1-3/4″ x 2-1/2″, 4″ x 4″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9090 / LB9100 ESD Label

ESD Label printed with “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic or Radioactive Fields” The LB9090 and LB9100
More Info
  • ESD label printed with “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic or Radioactive Fields”
  • Size: 4″ x 4″, 2″ x 2″
  • Permanent adhesive
  • 500 per roll

 

 

Add to quote


LB9110 / LB9120 ESD Label

ESD Label printed with “Attention Contents Static Sensitive Handling Precautions Required. Contents: ______” The LB9130 and LB9140 orange paper attention label comes on a 500 count
More Info
  • ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required. Contents: ______”
  • Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9130 / LB9140 ESD Label

ESD Label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations” The LB9130 and LB9140 yellow paper attention label comes on a 500 count roll. The
More Info
  • ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations”
  • Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9082 / LB9083 ESD Label

ESD Label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices” The LB9082 and LB9083 yellow paper attention label comes on a 500 count roll.
More Info
  • ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices”
  • Size: 2″ x 2″, 4″ x 4″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9080 / LB9081 ESD Label

ESD Label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices” The LB9080 and LB9081 yellow paper attention label comes on a 500 count roll.
More Info
  • ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices”
  • Size: 2″ x 2″, 4″ x 4″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9070 ESD Label

ESD Label printed with “This Station or Equipment is Static Safe" The LB9070 yellow paper attention label that comes on a 500 count roll. The permanent acrylic adhesive label provides a
More Info
  • ESD label printed with “This Station or Equipment is Static Safe”
  • Size: 1-3/4″ x 3″
  • Permanent adhesive
  • 500 per roll

Add to quote


LB9060 ESD Label

ESD Label printed with “Electrostatic Sensitive Devices Do Not Open or Handle Except At A Static Free Workstation” The LB9070 yellow paper label comes on a 500 count roll. The
More Info

ESD Label: “Electrostatic Sensitive Devices Do Not Open or Handle Except At A Static Free Workstation” Size: 1″ x 2-1/2″

Add to quote


ESD Label: ” Attention Sensitive Devices Handle Only At Static Safe Work Stations”. Size: 5/8″ X 2″

ESD Label: " Attention Sensitive Devices Handle Only At Static Safe Work Stations". Size: 5/8" X
More Info

ESD Label: ” Attention Sensitive Devices Handle Only At Static Safe Work Stations”. Size: 5/8″ X 2″

Add to quote


ESD Label: “Attention Electrostatic Sensitive Devices”. Size: 3/8″ X 1-1/4″

ESD Label: "Attention Electrostatic Sensitive Devices". Size: 3/8" X
More Info

ESD Label: “Attention Electrostatic Sensitive Devices”. Size: 3/8″ X 1-1/4″

Add to quote


ESD Label: “Attention Observe Precautions for Handling Electrostatic Devices” Size: 5/8″ X 2″

ESD Label: "Attention Observe Precautions for Handling Electrostatic Devices" Size: 5/8" X
More Info

ESD Label: “Attention Observe Precautions for Handling Electrostatic Devices” Size: 5/8″ X 2″

Add to quote


ESD Label: “Caution Sensitive Electronic Devices Do Not Open Except at Approved Field Force Protective Work Station” Size: 5/8″ X 2″

ESD Label: "Caution Sensitive Electronic Devices Do Not Open Except at Approved Field Force Protective Work Station" Size: 5/8" X
More Info

ESD Label: “Caution Sensitive Electronic Devices Do Not Open Except at Approved Field Force Protective Work Station” Size: 5/8″ X 2″

Add to quote


ESD Label: “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic, Fields” Size: 5/8″ X 2″

ESD Label: "Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic, Fields" Size: 5/8" X
More Info

ESD Label: “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic, Fields” Size: 5/8″ X 2″

Add to quote


WBAS44LP – ESD Trash Can Liner, Dissipative, Pink, 44 Gallon

Use ESD trash liners to dispose of waste materials that pose a static damage threat. The translucent pink trash liner has a 44 gallon capacity and fits Transforming Technologies WBAS180 ESD trash
More Info
  • Dissipative trash liners for ESD protection
  • 44 gallon capacity
  • Average surface resistivity is less than or equal to 10^11 ohms per square
  • Static decay rate is less than two seconds.
  • Sold in packs of 50 liners

Add to quote


WBAS22LP – ESD Trash Can Liner, Dissipative, Pink, 22 Gallon

Use ESD trash liners to dispose of waste materials that pose a static damage threat. The translucent pink trash liner has a 22 gallon capacity and fits Transforming Technologies WBAS90 ESD trash
More Info
  • Dissipative trash liners for ESD protection
  • 22 gallon capacity
  • Average surface resistivity is less than or equal to 10^11 ohms per square
  • Static decay rate is less than two seconds.
  • Sold in packs of 100 liners

Add to quote


WBASLP – ESD Trash Can Liner, Dissipative, Pink, 28 – 40 Quart (7 – 10 Gallon )

Use ESD trash liners to dispose of waste materials that pose a static damage threat. The translucent pink trash liner has a 7-10 gallon (28-40 Quart) capacity and fits Transforming Technologies
More Info
  • Dissipative trash liners for ESD protection
  • 7-10 gallon (28-40 Quart) capacity
  • Average surface resistivity is less than or equal to 10^11 ohms per square
  • Static decay rate is less than two seconds.
  • Sold in packs of 100 liners

Add to quote


WBAS44LB – ESD Trash Can Liner, Conductive, Black , 44 Gallon

Use these 44 gallon ESD trash liners to dispose of waste materials that pose a static damage threat. The conductive black trash liner has a 44 gallon  capacity and fits Transforming
More Info
  • Conductive black trash liner
  • 44 gallon capacity
  • 4 Mil Thickness
  • Safely dispose of waste materials that pose a static damage threat.
  • Sold in packs of 50 liners

Add to quote


WBAS22LB – ESD Trash Can Liner, Conductive, Black , 22 Gallon

Use ESD trash liners to dispose of waste materials that pose a static damage threat. The conductive black trash liner has a 22 gallon  capacity and fits Transforming Technologies WBAS90 trash
More Info
  • Conductive black trash liner
  • 22 gallon capacity
  • Safely dispose of waste materials that pose a static damage threat.
  • Sold in packs of 100 liners

Add to quote


WBASLB – ESD Trash Can Liner, Conductive, Black , 28 – 40 Quart (7 – 10 Gallon )

Use ESD trash liners to dispose of waste materials that pose a static damage threat. The conductive black trash liner has a 7-10 gallon (28-40 Quart) capacity and fits Transforming Technologies
More Info
  • Conductive Black Trash Liner
  • 28 – 40 Quart (7 – 10 Gallon )
  • Safely dispose of waste materials that pose a static damage threat.
  • Sold in packs of 100 liners

Add to quote


ESD Safe SMD Component Storage Box Cabinet – Conductive Plastic

Keep you surface mount components organized and safe from ESD with the SMD storage system. Organize, protect and store your interlocking SMD boxes in this 6 drawer conductive
More Info
  • Made of volume loaded conductive polystyrene
  • Tray compatible size combination
  • Spring loaded lid
  • Complies with EN 61340-5-1
  • Suitable for compartmented box type SMD810
  •  Color: Black
  • Recyclable

ESD Safe SMD Component Storage Boxes, Conductive Plastic – Black Lids

Static dissipative ESD wipers are suitable for nearly all electronic manufacturing and optical cleaning applications. Static-safe SMD boxes with spring-loaded hinges are designed to interlock for
More Info
  • Made of volume loaded conductive polystyrene
  • Tray compatible size combination
  • Spring loaded lid
  • Complies with EN 61340-5-1
  • Suitable for compartmented box type SMD810
  •  Color: Black
  • Recyclable

ESD Safe SMD Component Storage Boxes, Conductive Plastic – Clear Lids

Static dissipative ESD wipers are suitable for nearly all electronic manufacturing and optical cleaning applications. Static-safe SMD boxes with spring-loaded hinges are designed to interlock for
More Info
  • Made of volume loaded conductive polystyrene
  • Tray compatible size combination
  • Spring loaded lid
  • Complies with EN 61340-5-1
  • Suitable for compartmented box type SMD810
  •  Color: Black
  • Recyclable

BEMCOT M-3 – Static Dissipative Cleanroom Wipers

bemcot-m-II-clean-room-ESD-wipers
BEMCOT M-3 static dissipative cleanroom ESD wipers are suitable for nearly all electronic manufacturing and optical cleaning applications. Bemcot wipers are for quick and easy wiping in cleanrooms
More Info
  • Bemcot wipers are for quick and easy wiping in cleanrooms and other working environments that demand the lowest levels of lint and particles
  • Made out of cotton into a proprietary 100% filament rayon that absorbs 13 times its weight in liquid
  • Nonwoven, soft, and low-linting wiper with excellent antistatic and heat resistance properties
  • Used in semiconductor, optical, medical, cosmetics, food & beverage, printed circuit boards, building maintenance, automobile, aircraft, LCD, magnetic tapes, oil, tools, equipment, glass, optics, etc.

Add to quote


WP6200 Static Dissipative Wipers

Static dissipative ESD wipers are suitable for nearly all electronic manufacturing and optical cleaning applications. Transforming TechnologiesÂ’ ESD safe wipers are made from clean, durable
More Info
  • Static dissipative ESD wipes for all electronic manufacturing and optical cleaning applications
  • Complies with ANSI/ESD S20.20 ( per ANSI/ESD S11.11 & ANSI/ESD DS11.12 )
  • 100% knitted polyester
  • No carbon or metal fibers
  • Less than 100 volts tribo-charge
  • Good solvent resistance, lint free

Add to quote


MC1221W – ESD Safe Microscope Covers

Cover your microscopes with an ESD Safe Microscope cover to keep it free of dirt and other contaminates.  With Transforming Technologies’ MC1221W ESD safe microscope cover you can protect
More Info
  • ESD Safe Microscope Cover
  • Does not produce a significate static charge – ESD Safe!
  • Helps to keep microscopes free of dust
  • Permanently anti-static – Less than 10^6
  • Made with polyester and conductive yarn
  • Size: 10.25

Add to quote


ESD Safe Workstation Covers – Three Sizes

Drape ESD Workstation cover over your sensitive products to protect from ESD, dust and other contaminants! This cover creates a Faraday cage effect around the covered product to shield from
More Info
  • Provides ESD protection for sensitive processes and components
  • Groundable for added safety – 4MM Snap
  • Made with polyester with conductive yarn
  • ESD-safe logo designates safe to use in ESD protective environment
  • Resistance less than 10^5
  • Bound edges

ClP Series Anti-Static Cellulose Tape – Printed with ESD Symbol – Four Sizes

ESD Printed anti-static tape is perfect for a wide range of workstation applications such as binding, edging, securing, labeling and sealing ESD bags and ESD packing containers. Transforming
More Info
  • ESD safe clear cellulose tape with ESD Symbols in black print
  • 2.4 mil thick tape
  • Charge decay of <.014 seconds.
  • Available on 3″ cores in widths of 1/2″, 3/4″, 1″ and 2″ (70 meters / 229′ in length).
  • Used for general purpose mending, binding packaging and carton sealing.

DC1185.IDP – Permanently Dissipative ESD Sheet Protectors – Nine Hole Punch

Permanently dissipative ESD Sheet Protectors  The IDP-Stat sheet protectors are designed for use in controlled areas such as clean rooms where there are ESD sensitive devices. The static safe 9
More Info
  • Made with permanently dissipative IDP-STAT® PVC film
  • Lightly embossed to reduce glare
  • Resistant to print transfer
  • Yellow stripe with ESD identification
  • Typical Surface Resistivity: 10^9 – 10^10
  • 9-Hole Punch.ectors – Nine Hole Punch

Add to quote


DC2000 ESD Safe Pens

A commonly overlooked source of static is everyday office supplies. Ensure total ESD protection with static safe ESD pens. The DC2000 series static dissipative ball point pen is perfect for use
More Info
  • ESD safe pen compatible with clean rooms and other controlled areas
  • Printed with an ESD symbol in yellow
  • Fine point
  • Available with black, blue and red
  • Sold in 10 packs.

TC0839 Series – Conductive ESD Tool Carriers

The TC0839 tool caddy is designed for use in ESD controlled areas where there are ESD sensitive devices. A convenient open tool box made from conductive polypropylene provides static-safe storage of
More Info
  • ESD-safe tool carrier provides static-safe storage of tools and components
  • Made from conductive Polypropylene plastic
  • Surface resistivity: <10^5
  • Storage can be divided with up to four optional tray inserts

Add to quote


Am Series Yellow Vinyl Aisle Marking Tape

Transforming Technologies’ bright yellow vinyl floor tape with bold black ESD symbols is perfect for marking off ESD safe areas. Print reads “ESD: Safeguarded Work Area” with ESD symbol.
More Info
  • Bright yellow vinyl floor tape with bold black ESD symbols
  • Print reads “ESD: Safeguarded Work Area” with ESD symbol
  • 2″ and 3” wide rolls available in lengths of 36 yards.

FSM2424RSG – Field Service Mat w/Hardware – 2′ x 2′

A complete kit for working with ESD sensitive items in the field.    The FSM2424RSG Field Service Mat is made from a rugged, three-layer embossed PVC material and provides service personnel
More Info
  • Complete kit for servicing ESD items in the field
  • Size: 24″ x 24″ with two 8″ x 12″ pockets
  • Includes a FM2000 ground/coil combo cord
  • Comes with an WB0016 adjustable blue fabric wrist strap

Add to quote


FSM2424BSG – Field Service Mat w/Hardware – 2′ x 2′

A complete kit for working with ESD sensitive items in the field.    The FSM2424BSG Field Service Mat is made from a rugged, three-layer embossed PVC material and provides service personnel
More Info
  • Complete kit for servicing ESD items in the field
  • Size: 24″ x 24″ with two 8″ x 12″ pockets
  • Includes a ground/coil combo cord
  • Comes with an adjustable blue fabric wrist strap

Add to quote


FSM2424B – Blue Field Service Mat w/Hardware – 2′ x 2′

A complete kit for working with ESD sensitive items in the field. The FSM2424B Field Service Mat is made from a rugged, three-layer embossed PVC material and provides service personnel with a
More Info
  • Complete kit for servicing ESD items in the field
  • Size: 24″ x 24″ with two 8″ x 12″ pockets
  • Includes 1 CP1518BD ground cord with a bull dog clip
  • Comes with the WB1637  adjustable blue fabric wrist strap set

Add to quote


FSM2424R – Field Service Mat w/Hardware – 2′ x 2′

A complete kit for working with ESD sensitive items in the field. The FSM2424R Field Service Mat is made from a rugged, three-layer embossed PVC material and provides service personnel with a
More Info
  • Complete kit for servicing ESD items in the field
  • Size: 24″ x 24″ with two 8″ x 12″ pockets
  • Includes 1 FM2000 ground cord with a bull dog clip
  • Comes with the WB1637  adjustable blue fabric wrist strap set

Add to quote


ESD Socks: Works Great with ESD Shoes and Heel Grounders

Ensure that you are electrically connected to ground by wearing ESD socks with your ESD shoes or Heel Grounders. The toe and heels of the socks are reinforced with conductive yarn.  Made with
More Info
  • ESD socks ensure electrical contact between the body and ESD footwear.
  • Toe and heels of the socks are reinforced with conductive yarn.
  • Made with polyester, spandex and conductive yarn.

IDP Stat ESD Badge Holder

ESD Badge Holder
Protect your sensitive items with the permanently dissipative IDP-STAT® Badge Holder. The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key
More Info
  • Permanently Dissipative – ESD Properties will Never Expire
  • Resistance: 10^9-10^10
  • Hot Stamped with ESD Symbol
  • Credit Card Size – Fits Most IDs, Business cards and Key Cards.
  • Made from IDP-STAT® Dissipative PVC
  • Comes in packs of 10

Add to quote


GK1000 ESD Table Mat Grounding Kit

Easy to install kit to ground ESD table matting and up to two ESD wrist straps. Transforming Technologies GK1000 Table Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and
More Info
  • Kit for grounding ESD table mats
  • Includes 15ft low profile ground cord, and a universal snap
  • Can be installed with a Philips head screw driver.
  • Snap includes two screw lengths for thick or thin material

Add to quote


GK2000 ESD Floor Mat Grounding Kit

Kit includes everything needed to ground ESD floor matting. Transforming Technologies GK2000 Floor Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an
More Info
  • Kit for grounding ESD floor mats
  • Includes 15ft low profile ground cord, and a universal snap
  • Can be installed with a Philips head screw driver.
  • Snap includes two screw lengths for thick or thin material

Add to quote


CP1518-BD Common Point Ground, 15Â’, 10mm Female, 1 meg

A field service common point ground cord with a bull dog clip for easy connection to ground in the field. The CP1518BD ground cord offers the common ground point required by ANSI/ESD S-6.1 and
More Info
  • Common Point Ground
  • Bull Dog Grounding Clip for Connection to Ground
  • Length: 15ft
  • 10mm Female Snap
  • Has Two Banana Jacks for Coil Cords

Add to quote


CP2500 Series: Low Profile Common Point Ground Cords

Low profile common point ground cord
Low profile common point ground cord that can ground two wrist straps and a work surface. The CP2500 series low profile ground cords are highly durable and reliable ground cords. Equipped with two
More Info
  • Common point ground cord for two wrist straps and ESD mat
  • Low profile molded head
  • Length: 15ft long
  • 1meg resistor for safety (available without resistor)
  • Cords available with both male studs and female sockets

CP2522: Low Profile Common Ground Point Cord,10mm Male, 1 Meg

Low profile common point ground cord
Low profile common point ground cord that can ground two wrist strap and a table. The CP2522 low profile ground cords are highly durable and reliable ground cords. Equipped with two standard
More Info
  • Common point ground cord for two wrist straps and ESD mat
  • Low profile molded head with 10mm male snap
  • Length: 15ft long
  • 1meg resistor for safety (available without resistor)
  • Cords available with both male studs and female sockets

Add to quote


CP2522NR: Low Profile Common Ground Point Cord,10mm Male, No Resistor

Low profile common point ground cord
Low profile common point ground cord that can ground two wrist strap and a table - does not include a resistor. The CP2522NR low profile ground cords are highly durable and reliable ground cords.
More Info
  • Common point ground cord for two wrist straps and ESD mat
  • Low profile molded head with 10mm male snap
  • Length: 15ft long
  • Does not include a resistor (available with a 1meg resistor – CP2522 ground cord )
  • Cords available with both male studs and female sockets

Add to quote


CP2524: Low Profile Common Ground Point Cord,10mm Female Snap, 1 Meg

Low profile common point ground cord
Low profile common point ground cord that can ground two wrist strap and a table. The CP2524 low profile ground cords are highly durable and reliable ground cords. Equipped with two standard
More Info
  • Common point ground cord for two wrist straps and ESD mat
  • Low profile molded head with 10mm female snap
  • Length: 15ft long
  • 1meg resistor for safety (available without resistor)
  • Cords available with both male studs and female sockets

Add to quote


CP4070- Metal Bench Mount Ground Cord

Metal Bench Mount Ground CP4070 The CP4070 Metal Bench Mount Common Point Ground (CPT) offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The metal bracket mounts
More Info
  • Dual bench ground mount for single wire wrist straps
  • Mounts under workbench and can ground two operators
  • Made of heavy duty 0.05 inch anodized aluminum with 15 feet ground wire

Add to quote


CS1090 ESD Universal Snap Kit, 10mm

  The Transforming Technologies CS1090 Universal Snap Kit includes a 10 mm stud, 10 mm socket, threaded backing washer, conical nut, long screw, short screw, and ESD common point ground
More Info
  • Universal snap kit easily installs a ground point into a range of mat thicknesses 
  • User installable with a screwdriver
  • Installs a 10 mm snap or stud to ESD workstation materials
  • Includes 2 screws for thick and thin materials
  • 1 each: 10 mm socket, 10 mm stud, washer and screw base

Add to quote


CS123 – Snap Screw Set – 10mm

The CS123 Snap Screw Set provides a 10mm stud in worksurface rubber or vinyl. Includes a screw base and 10mm stud. Installs a 10mm studs into ESworkstationon materials and provides a solid
More Info
  • Installs a 10mm stud into ESD workstation materials
  • Creates a solid connection with wide screw base that sandwiches the material
  • Quickly un-installs so you can reuse the snap

Add to quote


CS125 – Ring Terminal Banana Jack

High quality ring terminal terminal that accepts standard banana
More Info

CS125 – Ring Terminal Banana Jack

Add to quote


CS0127 Molded Banana Jack Snap

The CS0127 Banana Jack Universal Snap adds a banana jack to any surface with a 10mm snap.  The CS0127 Molded Banana Jack Snap from Transforming Technologies adds a banana jack to a table mat.
More Info
  • Add a banana jack to any surface with a 10mm ground snap..
  • Molded plastic body with metal snaps
  • Most most banana plugs will fit the jack
  • Use with coil cords, wrist strap sets, common point grounds and constant monitors
  • Universal Snap:  Side 1: 10mm Male Stud; Side 2: 10mm Female Socket

Add to quote


CS0128-Socket 10mm Snap Adapter Set

CS0128-Stud
The Snap Adapter Set from Transforming Technologies is compatible and interchangeable with all major snap manufactures. The CS0128-socket connects a 10mm socket to a 10mm socket. Also available in a
More Info
  • Snap adapter that connects a 10mm socket to a 10mm socket
  • Compatible and interchangeable with all major manufactures of 10mm snaps
  • Stainless steel

Add to quote


CS0128-Stud 10mm Snap Adapter Set

CS0128-socket
The Snap Adapter Set from Transforming Technologies is compatible and interchangeable with all major snap manufactures. The CS0128-stud connects a 10mm stud to a 10mm stud. Also available in a
More Info
  • Snap adapter that connects a 10mm stud to a 10mm stud
  • Compatible and interchangeable with all major manufactures of 10mm snaps
  • Stainless steel

Add to quote


CS1000 Push and Clinch Grounding Snaps – 10mm

A quick and easy to install removable ground snap for ESD matting. These push & clinch snaps are ideal for multi-layer rubber or vinyl mats. The pronged 3/8" (10mm) socket or 3/8" (10mm) stud
More Info
  • Push and Clinch grounding snaps for ESD materials
  • Reusable snaps can be installed and un-installed by bending prongs.
  • 10mm (3/8”) snap size fits standard ESD equipment.
  • Male or Female snap

HG1232 – Heel Grounder – Cup Style – Buckle Closure

The Transforming Technologies HG1232 Heel Grounder is a superior quality, cup-style shoe grounding system designed for mobile personnel. The HG1232 is comfortable with most footwear and includes a
More Info
  • Buckle closure for tight fit
  • Durable molded resistor for safety
  • 35 mm reversible cup design increases heel grounders life
  • Made with durable ESD rubber

Add to quote


HG1360 Series Heel Grounder – Stretch Velcro Strap in Black, Orange, Red, or Blue

HG1360 Series
Ground mobile personnel with long lasting stretch Velcro ESD heel grounders. The HG1360 Heel Grounder is constructed from durable materials and features a stretch velcro closure strap to maximize
More Info
  • Reversible Cup Design Allows for Longer Life
  • Stretch Velcro Strap Creates a Secure Fit Around Shoe
  • Buried 1meg Resistor
  • Available in Black, Red, Blue, and Orange

HG1360NM2 Non-Marketing ESD Heel Grounders

HG1360NM Non Marking Heel Grounder
Non-marking stretch Velcro heel grounders help keep your controlled environment clean and your personnel grounded. The HG1360NM2 is constructed from a non-marking and highly dissipative three
More Info
  • Non-Marketing ESD Heel Grounder
  • Made with ESD gray rubber that will not leave marks on floors
  • Stretch velcro closure straps ensure a solid fit
  • High visibility blue color
  • 1 meg resistor for safety

Add to quote


HG1390S Hi-Vis Yellow Velcro ESD Heel Grounder – 1Meg

High visibility yellow closure strap ensures that people wearing heel grounders are easily seen. The Transforming Technologies HG1390S Heel Grounder is constructed from durable materials and
More Info
  • Hi-Vis Yellow Velcro ESD Heel Grounder
  • Velcro with elastic ensures a tight, comfortable fit
  • Buried 1meg resistor for safety
  • Reversible 1.25″ cup design extends life

Add to quote


HG1580NM – Heel Grounder – Non-marking – Sport Style – 1 Meg

The HG1580NM  non-marking Sport Style heel grounders are ideal for boots, cross-training athletic shoes and other odd sized shoes. Constructed from durable materials, with a moldable
More Info
  • Sport Heel Grounders are ideal for boots and cross-training athletic shoes
  • Moldable back strap which better grips shoes for a tighter fit
  • A velcro closure ensures a tight and comfortable fit on the shoe
  • Made with ESD gray rubber that will not leave marks on floors
  • 1 Meg resistor

Add to quote


HG1594 – Sport Heel Grounders – Buckle Closure

The HG1594 Sport Style heel grounders are ideal for boots, cross-training athletic shoes and other odd sized shoes. Constructed from durable materials, with a moldable backing which better
More Info
  • Sport Heel Grounders are ideal for boots and cross-training athletic shoes
  • Moldable back strap which better grips shoes for a tighter fit
  • A buckle closure makes it easy to put on and take off
  • High visibility rep color
  • 1 Meg Resistor

Add to quote


HG1590 – Sport Heel Grounders – Velcro Closure

The HG1590 Sport Style heel grounders are ideal for boots, cross-training athletic shoes and other odd sized shoes. Constructed from durable materials, with a moldable backing which better
More Info
  • Sport Heel Grounders are ideal for boots and cross-training athletic shoes
  • Moldable back strap which better grips shoes for a tighter fit
  • A velcro closure ensures a tight and comfortable fit on the shoe
  • High visibility rep color
  • 1 Meg Resistro

Add to quote


HG2520 ESD Toe Grounders

Toe grounders fit a wide variety of odd shaped shoes including woman's high heels to provide ESD grounding protection for staff on the move. The HG2520 toe grounder from Transforming
More Info
  • Perfect Fit for Odd Shaped Footwear Such as High Heels or Small Shoes
  • Elastic Closure
  • Molded Resistor

Add to quote


HG4560 Disposable ESD Heel Grounders

Disposable Heel Grounders are the perfect solution for plant visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Constructed of a durable
More Info
  • Low Cost Method of Grounding Temporary Personnell
  • High Visibility Yellow Color
  • Sold In Packs of 100
  • Disposable: Perfect for One Time Use

Add to quote


HG4560L Disposable ESD Heel Grounders, 24″ Long

Disposable Heel Grounders are the perfect solution for plant visitors and other temporary personnel who enter static controlled environments with ESD protective flooring. Twice as long as the
More Info
  • Low Cost Method of Grounding Temporary Personnell
  • High Visibility Yellow Color
  • Sold In Packs of 100
  • Disposable: Perfect for One Time Use

Add to quote


HG6000 Full Coverage ESD Sole Grounders

Full coverage sole Grounders provide a more complete path to ground than regular heel or toe grounders due to a wider and more consistent contact area. ESD Sole Grounders (or ESD Foot
More Info
  • Full coverage sole grounders – 20 times the surface contact of heel grounders
  • Wider and more consistent contact area ensures grounding
  • Rapid and complete static dissipation due to constant contact through entire walking motion
  • Longer life than heel grounders
  • Available in XS,S, M and L sizes with one or two meg resistors

WB1600 Series Single Wire Wrist Band & Coil Cord Set – 6ft, 12ft, 20ft cords; 4, 7,10mm snaps

Versatile wrist strap and coil cord set is a durable and long lasting method of grounding personnel.  The WB1600 Series Wrist Band and Coil Cord set is the most versatile and cost effective
More Info
  • Made with Soft and Comfortable Woven Fabric
  • Hypoallergenic Fabric Band
  • Coil Cord is Durable and Has Excellent Coil Memory
  • Versatile and Cost Effective Method of Grounding

WB6000 Series Metal Wrist Band & Coil Cord Set – Metal expansion band; 6ft, 12ft cords

Durable, clean room safe ESD Metal Wrist Strap Set with 6ft, 12ft or 20ft coil cords. The WB6000 Series Metal Wrist Band and Coil Cord set is a premium band set offered by Transforming
More Info
  • Metal wrist band & coil cord – Metal expansion band; 6ft, 12ft or 20ft cords
  • Clean room compatible Speidel band
  • 4mm snap that fits most common coil cords
  • Available with straight or right angle coil cords

WB9000 Series Metal Wrist Band & Coil Cord Set – Metal expansion band; 6ft, 12ft cords

The WB9000 Series Metal Wrist Band and Coil Cord set is a premium band set offered by Transforming Technologies. Featuring a high quality adjustable, one size fits all metal wrist strap set with an
More Info
  • Durable metal expansion wrist band
  •  Insulating outer surface and stainless steel inner surface
  • Comes with a 6ft, 12′, 20′ coil cord or as a band only
  • Small, Medium, Large or Adjustable

WB2500 Series Dual Wire Wrist Band & Coil Cord Set – 6ft, 12ft cords

"Two Snap" fabric dual wire wrist strap with two 4mm snaps for use with dual wire constant monitors. The adjustable WB2500 series dual wire fabric wrist strap set features two 180 degree
More Info
  • “Two-snap” dual wire wrist strap with two 4mm snaps
  • For use with dual wire resistance constant monitors
  • High-quality red fabric adjustable wrist band
  • Packaged with a dual wire coil cord with two 4mm snaps in 6′ or 12′ lengths

WB5000 Series Dual Conductor Metal Wrist Band and Coil Cord Set

The WB5000 series is a premium metal expansion wrist strap set is designed for use with a Dual Conductor Constant Workstation Monitor to maximize ESD protection. The Speidel metal band features
More Info
  • Premium metal expansion wrist strap with more reliable path-to-ground
  • Durable metal band - Long wearing, easy to clean
  • Superior contact with skin
  • Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, operator has reliable path-to-ground with other wire
  • Meets requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1
  • 3.4mm plug size
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.
  • Fixed sized bands available in three sizes

CC9020 Series Premium Straight Coil Cords Series: 20′ Long – 4mm Snap

Durable 20ft ESD coil cords with a universally solid connection to standard wristbands. The Transforming Technologies CC9020  Premium Coil Cord has a 2.5 mm polyurethane coil insulation that
More Info
  • Premium Straight Coil Cords
  • 4mm Snap
  • Length: 20′, extended
  • Resistor: 1 meg ohm
  • Flex Life: > 50,000 flexes
  • Color: Black
  • Banana: Swivel type

Add to quote


CC9037 Series Premium Straight Coil Cords Series: 6′ Long – 4mm Snap

Durable 6ft ESD coil cords with a universally solid connection to standard wristbands. The Transforming Technologies CC9037  Premium Coil Cord has a 2.5 mm polyurethane coil insulation that
More Info
  • Premium Straight Coil Cords
  • 4mm Snap
  • Length: 6′, extended
  • Resistor: 1 meg ohm
  • Flex Life: > 50,000 flexes
  • Color: Black
  • Banana: Swivel type

CC9000 Series Premium Straight Coil Cords Series: 6′, 12′ and 20′ Lengths – 4mm, Snap – Black

Durable ESD coil cords with a universally solid connection to standard wristbands. The Transforming Technologies CC9000 Series Premium Coil Cord has a 2.5 mm polyurethane coil insulation that
More Info
  • 9000 Series Premium Straight Coil Cords Series: 6′, 12′ and 20′ Lengths – 4mm, Snap – Black
  • Length: 6′, extended; 12,extended;20 extended;
  • Resistor: 1 meg ohm
  • Flex Life: > 50,000 flexes
  • Color: Black
  • Banana: Swivel type
  • 4mm Snap

CC3000 Series: Dual Conductor Coil Cord – 5ft; 10ft and 20ft lenghts

Used in conjunction with Dual Conductor Constant Workstation Monitors, Transforming TechnologiesÂ’ CC3000 series Dual Conductor Coil Cords provide unmatched reliability and value. A double
More Info
  • Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.
  • 3.4mm straight mono plug
  • One megohm series resistor
  • Superior resistor connection strain relief
  • Exceeds ANSI/ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirements.
  • Dual Conductor Coil Cord – 5ft; 10ft and 20ft lengths
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

CC2695 One Snap Dual Wire Coil Cord with Parking Jack: 5′, 10′, and 20′ Lengths

The CC2695-PÂ’s polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance. The molded snap head provides a convenient parking jack for the cord with not in
More Info
  • “One Snap” Dual Wire Design Contains Two Snaps in a Molded Head
  • Innovative Parking Jack To Hold Coil Cord Plug
  • For Use with Dual Wire Resistance Constant Monitors
  • Length: 5′, 10′, and 20′ extended
  • Resistor: 1 meg ohm
  • Flex Life: > 20,000 flexes
  • Color: Blue, black
  • Banana: 3.5 mm phono plug*

CC3000NRS Interconnect Two Banana Cord with No Resistor

CC3000NRS-straight-cord
The Transforming Technologies CC3000NRS Interconnect Cord has 2.5 mm polyurethane insulation that offers excellent cord life. Two standard banana plugs allow the cord to connect two devices such as
More Info
  • Cord use to connect two items together
  • Each end terminates with a standard banana plug
  • Length: 8′
  • Resistor: No Resistor.
  • Flex Life: > 50,000 flexes
  • Color: Black
  • Banana: Swivel type

Add to quote


3700 Series Classic Straight Coil Cords Series: 6′ and 12′ Lengths – 4mm, 7mm and 10mm Snap – Black

The Transforming Technologies Classic Straight Plug Coil Cord Series has 2.5 mm polyurethane coil insulation that offers excellent coil memory. A swivel type banana jack increases coil life and
More Info
  • Coil cords for grounding people and items in an ESD protected area.
  • Length: 6′, extended or 12′, extended
  • Snap Size: 4 mm, 7mm and 10mm
  • Resistor: 1 meg ohm standard, 270K ohm and 0 meg ohm are also available.
  • Flex Life: > 50,000 flexes
  • Cord Color: Black
  • Banana: Swivel type – Fits standard banana jacks

6500 Neutralizer Auto Body Refinishing Anti-static Blow-off Gun – Battery Operated

The 6500 Neutralizer® AC incorporates the efficiency and power of an air amplifier with the proven technology of corona ionization to produce a highly effective static eliminating blow-off gun. In
More Info
  • Quickly eliminates static  – great for coating/painting, auto body refinishing. Static can attract unwanted dust and particles to the surface of the glass, creating a tainted surface.
  • Battery operated with a rechargeable lithium battery
  • The Neutralizer® AC Ionizing Blow Gun is designed to be durable, dependable, and trouble free.
  • High air output design

Add to quote


SCION IN1200 Series ESD Ion Bars

Remote controlled ionizing bar that quickly eliminates static charge The SCION IN1200 ionizing bar is an effective tool to eliminate static in the electronics, plastics, chemicals, printing,
More Info
  • Provides uniform static elimination at high speeds.
  • AC Square Wave Technology  – AC stability with DC control
  • Quickly and efficiently controls static in mini-environments, laminar flow hoods and wide-area workstation applications.
  • It is a highly effective tool in electronics, plastics, chemicals, printing, textile, optical and other industries.
  • Available in 12in, 22in., 44in. or 64in. lengths.

Ptec™ IN4200PE AirFLEX Flexible Neck Ionizing Nozzle with Photoelectric Eye – Mountable

The IN4200PE flexible nozzle neck frees the operator's hands during assembly and manufacturing processes. A photoelectric eye controls both ionization and airflow, which reduces compressed air costs
More Info
  • Flexible neck allows you to optimally position airflow.
  • Hands-Free operation – With Photo Electric Eye
  • Multiple nozzle options to customize airflow for your specific application.
  • Mountable
  • Optional .01 micron filter for clean air
  • No periodic adjustments.

Add to quote


Ptec™ IN4000PE AirFLEX Flexible Neck Ionizing Nozzle with Photoelectric Eye

The IN4000PE flexible nozzle neck frees the operator's hands during assembly and manufacturing processes. A photoelectric eye controls both ionization and airflow, which reduces compressed air costs
More Info
  • Flexible neck allows you to optimally position airflow.
  • Multiple nozzle options to customize airflow for your specific application.
  • Hands-Free operation – With Photo Electric Eye
  • Optional .01 micron filter for clean air
  • Ionization (green) and HV alarm (red) lights.
  • No periodic adjustments.

Add to quote


PTEC IN5120 “In Tool” ESD Ionizing Blower

in5120-in-tool-small-ionizing-blower
The Ptec™ "In Tool" small Ionizer is versatile table-top or "in-tool" solution for static issues. The IN5120 ionizing blower combines exceptionally fast static decay capability with
More Info
  • Remove Static Charges Quickly and Efficiently
  • Perfect for “In Tool” Applications or Single Station Use
  • Small Footprint – Does Not Take Up Space
  • Variable Fan Speed
  • Standard Products Works on All Power Circuits: 100-240v

Add to quote


Ptec™ IN3425PE AC Ionizing Nozzle with Photoelectric Eye

The IN3425PE is a versatile ionizing air nozzle that can handle many unique, narrow area applications hands-free. The Ptec™ IN3425PE ionizing nozzle is a small, mountable ionizer that
More Info
  • Physically small and light, can be mounted in hard to reach areas.
  • Suitable for pinpoint, high-pressure air purging static elimination
  • Multiple nozzle options to customize airflow for your specific application.
  • Optional .01 micron filter for clean air
  • A proximity sensing photoelectric eye controls the power and air flow for easy hands free ionization.

Add to quote


Ptec™ IN3425 AC Ionizing Nozzle

The IN3425 is a versatile ionizing air nozzle that can handle many unique, narrow area applications with ease. The Ptec™ IN3425 ionizing nozzle is a small, mountable ionizer that can
More Info
  • Physically small and light, can be mounted in hard to reach areas.
  • Suitable for pinpoint, high-pressure air purging static elimination
  • Multiple nozzle options to customize airflow for your specific application.
  • Optional .01 micron filter for clean air

Add to quote


Ionizer Output Nozzle Tips

Change airflow of ionizers with output tips to handle unique and difficult point-of-use ionization applications. The IN0010 nozzle tip comes standard with ionizers : IN6430, IN3425,
More Info

Change airflow of IN3425, IN3425PE, IN4000, IN4000PE and IN6430 ionizers with output nozzles tips

  • 15° Angle
  • Wide Angle
  • Luer Lock
  • Long Range
  • Bendable
  • Manifold

FL0020 – Filter for Ionizing Nozzles

Use the FL0020 filter to ensure clean ionized air with the Transforming Technologies ionizing nozzles. The FM0020 micro filter features a hollow fiber membrane that provides excellent
More Info
  • 0.01μm Hollow Fiber Micro Filter
  • Excellent Particle Removal Efficiency
  • Compact and Light Weight
  • Quick and Convenient Filter Change
  • Use with IN3425, IN3425PE, IN4000, IN4000PE

Add to quote


FL0030 – Filter for the IN6430 Ionizing Gun

FL0030
Use the FL0030 filter to ensure clean ionized air with the IN6430 gun. The FM0030 micro filter features a hollow fiber membrane that provides excellent filtration and has a long service life.
More Info
  • 0.01μm Hollow Fiber Micro Filter for the IN6430 ionizing gun
  • Excellent Particle Removal Efficiency
  • Compact and Light Weight
  • Quick and Convenient Filter Change
  • Precision Cleaned Product

Add to quote


Translate »