Personal Grounding

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes a FM2000 ground/coil combo cord
• Comes with an WB0016 adjustable blue fabric wrist strap

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes a ground/coil combo cord
• Comes with an adjustable blue fabric wrist strap

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes 1 CP1518BD ground cord with a bull dog clip
• Comes with the WB1637  adjustable blue fabric wrist strap set

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes 1 FM2000 ground cord with a bull dog clip
• Comes with the WB1637  adjustable blue fabric wrist strap set

• Kit for grounding ESD table mats
• Includes 15ft low profile ground cord, and a universal snap
• Can be installed with a Philips head screw driver.
• Snap includes two screw lengths for thick or thin material

• Kit for grounding ESD floor mats
• Includes 15ft low profile ground cord, and a universal snap
• Can be installed with a Philips head screw driver.
• Snap includes two screw lengths for thick or thin material

CP1518 Common Point Ground, 15Â’, 10mm Male, 1 meg

• Common Point Ground
• Bull Dog Grounding Clip for Connection to Ground
• Length: 15ft
• 10mm Female Snap
• Has Two Banana Jacks for Coil Cords

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm male snap
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm male snap
• Length: 15ft long
• Does not include a resistor (available with a 1meg resistor – CP2522 ground cord )
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm female snap
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Dual bench ground mount for single wire wrist straps
• Mounts under workbench and can ground two operators
• Made of heavy duty 0.05 inch anodized aluminum with 15 feet ground wire

CP4822: Quad Common Point Ground Cords

FM1500 Series: Low Profile Floor Mat Ground Cords

FM2000 Center Snap Common Point Ground Cord System

AC100 – Alligator Clip

• Universal snap kit easily installs a ground point into a range of mat thicknesses 
• User installable with a screwdriver
• Installs a 10 mm snap or stud to ESD workstation materials
• Includes 2 screws for thick and thin materials
• 1 each: 10 mm socket, 10 mm stud, washer and screw base

CS0122-Stud – Rivet Ground Snap – Stud

• Installs a 10mm stud into ESD workstation materials
• Creates a solid connection with wide screw base that sandwiches the material
• Quickly un-installs so you can reuse the snap

CS0122-Socket – Rivet Ground Snap – Socket

CS125 – Ring Terminal Banana Jack

CS126 Series Stacking Snap Adpaters

• Add a banana jack to any surface with a 10mm ground snap..
• Molded plastic body with metal snaps
• Most most banana plugs will fit the jack
• Use with coil cords, wrist strap sets, common point grounds and constant monitors
• Universal Snap:  Side 1: 10mm Male Stud; Side 2: 10mm Female Socket

• Snap adapter that connects a 10mm socket to a 10mm socket
• Compatible and interchangeable with all major manufactures of 10mm snaps
• Stainless steel

• Snap adapter that connects a 10mm stud to a 10mm stud
• Compatible and interchangeable with all major manufactures of 10mm snaps
• Stainless steel

CS128 Snap Adapter Set

• Push and Clinch grounding snaps for ESD materials
• Reusable snaps can be installed and un-installed by bending prongs.
• 10mm (3/8”) snap size fits standard ESD equipment.
• Male or Female snap

AD22 Banana Jack Outlet Adapter

• Buckle closure for tight fit
• Durable molded resistor for safety
• 35 mm reversible cup design increases heel grounders life
• Made with durable ESD rubber

• D-ring closure
• Durable molded resistor
• 35 mm cup design

• Standard Blue Velcro ESD Heel Grounder
• Hook and loop velcro closure
• Buried resistor
• 1.25″ cup design

• Reversible Cup Design Allows for Longer Life
• Stretch Velcro Strap Creates a Secure Fit Around Shoe
• Buried 1meg Resistor
• Available in Black, Red, Blue, and Orange

• Non-Marketing ESD Heel Grounder
• Made with ESD gray rubber that will not leave marks on floors
• Stretch velcro closure straps ensure a solid fit
• High visibility blue color
• 1 meg resistor for safety

• Hi-Vis Yellow Velcro ESD Heel Grounder
• Velcro with elastic ensures a tight, comfortable fit
• Buried 1meg resistor for safety
• Reversible 1.25″ cup design extends life

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A velcro closure ensures a tight and comfortable fit on the shoe
• Made with ESD gray rubber that will not leave marks on floors
• 1 Meg resistor

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A buckle closure makes it easy to put on and take off
• High visibility rep color
• 1 Meg Resistor

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A velcro closure ensures a tight and comfortable fit on the shoe
• High visibility rep color
• 1 Meg Resistro

• Perfect Fit for Odd Shaped Footwear Such as High Heels or Small Shoes
• Elastic Closure
• Molded Resistor

• Low Cost Method of Grounding Temporary Personnell
• High Visibility Yellow Color
• Sold In Packs of 100
• Disposable: Perfect for One Time Use

• Low Cost Method of Grounding Temporary Personnell
• High Visibility Yellow Color
• Sold In Packs of 100
• Disposable: Perfect for One Time Use

• Full coverage sole grounders – 20 times the surface contact of heel grounders
• Wider and more consistent contact area ensures grounding
• Rapid and complete static dissipation due to constant contact through entire walking motion
• Longer life than heel grounders
• Available in XS,S, M and L sizes with one or two meg resistors

• Made with Soft and Comfortable Woven Fabric
• Hypoallergenic Fabric Band
• Coil Cord is Durable and Has Excellent Coil Memory
• Versatile and Cost Effective Method of Grounding

WB2600 Series Single Wire Wrist Band & Coil Cord Set

WB4000 Series Wrist Band & Coil Cord Set – 6ft, 12ft cords; Machined 4mm snap

WB5600 Series Anti-Allergy Wrist Band & Coil Cord Set – 4mm snap, 6ft or 12ft coil cord

• Metal wrist band & coil cord – Metal expansion band; 6ft, 12ft or 20ft cords
• Clean room compatible Speidel band
• 4mm snap that fits most common coil cords
• Available with straight or right angle coil cords

WB8000 Wrist Band & Coil Cord Set Series -Fabric Clasp band; 6ft, 12ft cords

• Durable metal expansion wrist band
•  Insulating outer surface and stainless steel inner surface
• Comes with a 6ft, 12′, 20′ coil cord or as a band only
• Small, Medium, Large or Adjustable

WB5407 Disposable Wrist Band

• “Two-snap” dual wire wrist strap with two 4mm snaps
• For use with dual wire resistance constant monitors
• High-quality red fabric adjustable wrist band
• Packaged with a dual wire coil cord with two 4mm snaps in 6′ or 12′ lengths

• Premium metal expansion wrist strap with more reliable path-to-ground
• Durable metal band - Long wearing, easy to clean
• Superior contact with skin
• Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, operator has reliable path-to-ground with other wire
• Meets requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1
• 3.4mm plug size
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.
• Fixed sized bands available in three sizes

WB7000 Series Dual Conductor Fabric Wrist Band and Coil Cord Set

CC3000R Dual Conductor Right Angle Coil Cord – 5ft; 10ft and 20ft lenghts

• Premium Straight Coil Cords
• 4mm Snap
• Length: 20′, extended
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

• Premium Straight Coil Cords
• 4mm Snap
• Length: 6′, extended
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

• 9000 Series Premium Straight Coil Cords Series: 6′, 12′ and 20′ Lengths – 4mm, Snap – Black
• Length: 6′, extended; 12,extended;20 extended;
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type
• 4mm Snap

9000R Premium Right Angle Coil Cords Series: 6′, and 12′ Lengths – 4mm, Snap – Black

• Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.
• 3.4mm straight mono plug
• One megohm series resistor
• Superior resistor connection strain relief
• Exceeds ANSI/ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirements.
• Dual Conductor Coil Cord – 5ft; 10ft and 20ft lengths
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

• “One Snap” Dual Wire Design Contains Two Snaps in a Molded Head
• Innovative Parking Jack To Hold Coil Cord Plug
• For Use with Dual Wire Resistance Constant Monitors
• Length: 5′, 10′, and 20′ extended
• Resistor: 1 meg ohm
• Flex Life: > 20,000 flexes
• Color: Blue, black
• Banana: 3.5 mm phono plug*

CC2080 Series Two Snap Dual Wire Coil Cords: 6′, and 12′ Lengths – 4mm

• Cord use to connect two items together
• Each end terminates with a standard banana plug
• Length: 8′
• Resistor: No Resistor.
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

CC3000NR Interconnect Two Banana Coil Cord with No Resistor

• Coil cords for grounding people and items in an ESD protected area.
• Length: 6′, extended or 12′, extended
• Snap Size: 4 mm, 7mm and 10mm
• Resistor: 1 meg ohm standard, 270K ohm and 0 meg ohm are also available.
• Flex Life: > 50,000 flexes
• Cord Color: Black
• Banana: Swivel type – Fits standard banana jacks