Test Equipment

Showing all 54 results

Warmbier EFM51.VK Electrostatic Field Meter Verification Kit

The EFM51WT Walking Test Kit is a hand-held  meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5.   The
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Pocket-size meter
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”
  • Evaluate ionizer efficiency
  • Measure static fields, potentials, and discharge times

Add to quote


Warmbier EFM51.CPS Charge Plate System and Field Meter

The Wolfgang Warmbier EFM51.CPS is used to measure and evaluate an ionizer's efficiency as well as fully functioning field meter. The EFM51 is a full-featured hand-held field meter
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Storage bag including ground cable and clip
  • Pocket-size
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”

Add to quote


Warmbier EFM51 Electrostatic Field Meter

The Wolfgang Warmbier EFM51 is a handheld meter to quickly detect and measure electrostatic charge accumulation on surfaces. The EFM51 is a full-featured hand-held field meter used to perform static
More Info
  • Measures static voltages within ±20kV (20,000V)
  • Two LED guide ring lights help position the field meter
  • Storage bag including ground cable and clip
  • Pocket-size
  • Verify Ionizer with EFM51.CPS “Charge Plate Set”

Add to quote


Warmbier EFM51WT Field Meter Walking Test Kit

A hand-held meter used to test the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The electrostatic charge of a person walking on an ESD
More Info
  • Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
  • Measures Voltage Generated on the Body While Walking
  • Handheld, Portable Meter with Conductive Carrying Case
  •  Also is a Fully Functional Field Meter – Measures Static Fields, Potentials and Discharge Times.

Add to quote


Warmbier ESD Starter Kit with Field Meter and SRM Meter

A kit to test basic ESD measurements such as surface resistivity and electrostatic fields. A complete and very useful tool kit for testing and measuring different products and materials within an
More Info
  • Quickly and Easily Test Surface Resistivity & Static Fields
  • Portable, Handheld Devices in a Lightweight Conductive Case
  • Takes The Basic Measurements Needed for an ESD Program

Add to quote


Warmbier Walking Test Kit WT5000 Electrometer

Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has been designed to perform a voltage
More Info
  • Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
  • Measures Voltage Generated on the Body While Walking
  • Body Voltage is Displayed on Meter as well as Live Via a Computer
  • Easy to use Analysis Software to Save, Measure, Print and Export Tests

Add to quote


Warmbier TF-530 Digital Thermo-Hygrometer

wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier
The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and economical way to track temperature and humidity
More Info
  • Take Precise Temperature and Humidity Measurements
  • One Button Operation
  • Mountable: Built-in 1/4” Tripod Thread
  • Temperature: -30…+70°C (± 0,5°C at -10…+70°C)
  • Humidity: 0 … 100% (± 3% at 20…80%)

Add to quote


Warmbier 7220.45 Hand Probes for Testing ESD Floors

wolfgang-warmbier-hand-probe-7220
The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while
More Info

Add to quote


Warmbier CL49 Clamp Probes for Testing ESD Garments

The CL49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20. The clamp ensures excellent contact during ESD garment tests such as sleeve-to-sleeve continuity measurements.
More Info
  • Clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20
  • Wide steel clamps ensures excellent contact with fabric
  • Made from rugged stainless steel
  • Banana plug socket for connection to the testing meter

Add to quote


Warmbier Concentric ring probe model 880, with carrying case

The 880 concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The Concentric
More Info
  • A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.
  • Concentric ring with conductive rubber (R < 5 ohm) with silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying case

Warmbier 890 Two Sided Probe

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique
More Info
  • Two-sided probe combines a concentric ring and disk probe
  • Made with conductive plastic containing silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying

Add to quote


Warmbier SRM200 Pocket Digital Surface Resistance Verification Kit

Full-featured digital Surface Resistance Meter with lightweight travel probes, two-point probe, data storage, temperature and humidity testing! SRM200 is a very useful instrument
More Info
  • Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
  • Test range: 10^3-10^12
  • Stores test data that can be accessed via USB 
  • Measures temperature and humidity
  • Test voltage: 10V/100V(automatic ranging)
  • Built-in resistivity probes
  • Carrying case & calibration certificate included

Add to quote


Warmbier SRM200 Pocket Digital Surface Resistance Meter

Full featured digital Surface Resistance Meter with data storage, temperature and humidity testing! SRM200 is a very useful instrument for checking surface resistance and resistance to
More Info
  • Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
  • Test range: 10^3-10^12
  • Stores test data that can be accessed via USB 
  • Measures temperature and humidity
  • Test voltage: 10V/100V(automatic ranging)
  • Built-in resistivity probes
  • Carrying case & calibration certificate included

Add to quote


Warmbier METRISO®B530 Surface Resistance Test Kit

Take quick and accurate ESD measurements of materials with this high resistance testing kit. The Metriso® B530 test kit efficiently measures a wide resistance range and is suitable for
More Info
  • Perform resistance tests to evaluate items for ESD compliance
  • Test range: Low ohmic range: 1 to 10 kOhm – 199 GOhm
  • Comes with 5lb probe set with innovative extension handle
  • Comes in conductive case with handle

Add to quote


Warmbier 15 Glove Probe

Probe used to take accurate resistance measurements of ESD Gloves. Model# 15 Glove probe is designed to evaluate ESD gloves according to ANSI ESD20.20. The probe’s weight ensures
More Info
  • Ensures Excellent Contact During Evaluations of ESD Gloves
  • Rugged Metal Probe
  • 4mm Banana Plug Socket Connection
  • For Use With Resistance Meters

Add to quote


SRM330 Lightweight Travel Surface Resistance Meter Kit

The ultimate travel kit for testing materials for electrical resistivity/resistance - Lightweight and portable! The battery powered SRM330 is equipped with built-in parallel electrodes for quick
More Info
  • Easy-to-read color coded readout screen
  • Two lightweight “Press & Test” travel electrodes
  • Built in resistivity probes
  • Automatic test voltage selector
  • Carrying case

Add to quote


SRM310 Pocket Digital Surface Resistance Test Kit

Pocket-sized, battery-powered Surface Resistance Meter is easy to use, transport and test. This SRM 310 uses built-in parallel electrodes to accurately measure electrical resistance  for
More Info
  • Pocket-Sized Digital Surface Resistance Test Kit
  • Test range: 10^3-10^12
  • Test voltage: 10V/100V(automatic ranging)
  • Accuracy + 5%
  • Built-in resistivity probes
  • Carrying bag

Add to quote


SRM500K Digital Surface Resistance Test Kit

The SRM500K is a digital surface resistance test kit designed to test all conductive, anti-static and static dissipative surfaces for electrical resistivity/ resistance according to EOS/ESD, CECC,
More Info
  • Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance
  • 10v and 100v range voltage selection
  • Automatic zeroing and power shut off
  • Tests temperature and humidity
  • Two 5 lb disk probes
  • Built-in resistivity probes
  • Carrying case

Add to quote


Warmbier METRISO® B530 ESD Audit Kit

The METRISO® B530  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for
More Info

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

  • Measure electrostatic fields
  • Measure surface resistance
  • Analyze ionizers performance
  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure temperature and relative humidity

Add to quote


Warmbier METRISO® 3000 ESD Audit Kit

The METRISO® 3000  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for
More Info

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

  • Measure electrostatic fields
  • Measure surface resistance
  • Analyze ionizers performance
  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure temperature and relative humidity

Add to quote


Warmbier METRISO® 3000 High Resistance Test Kit

A Surface Resistance Test Kit capable of measuring a wide resistance range and complete the tests required for an ESD protection plan. The METRISO 3000 test kit measures a wide
More Info
  • Perform resistance tests to evaluate items for ESD compliance
  • Test range: Low ohmic range: 1 to 10 kOhm
    High ohmic range: 1 KOhm to 1.2 TOhm
  • Store up to 50,000 test values and create reports with included software
  • Results displays on LCD screen
  • Comes with 5lb probe set and hand probe
  • Comes in conductive case with handle
  • Tests Temperature and Humidity

Add to quote


EFM115 Electrostatic Field Meter and Ion Balance Tester

The EFM115 is a convenient electrostatic field meter used to locate and measure static charges and test the balance of air ionizers. Static Field Meter  Its compact design and four button
More Info
  • Combination static field meter and ion balance tester
  • Four button operation
  • Digital display with numerical readout and bar graphs
  • Two LED guide ring lights help position the field meter
  • Pocket-size
  • Meets ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

Add to quote


CAL1000 – Calibration Verification Device

CAL1000
The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to
More Info
  • Verify ESD meters are calibrated and in proper working order
  • Precision resistor box
  • Passive – Does not require power
  • Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others.

Add to quote


PDT78PV – Verification Unit for the PDT700K and PDT800K

PDT78PV
Verify that the PDT700K and PDT800K combo tester are operating correctly. The PDT700K and PDT800K are factory calibrated and annual calibration is not necessary. The PDT78PV verification
More Info
  • Verify that the PDT700K and PDT800K combo tester are operating correctly.
  • Resistance Box with Fixed 5% Precision Resistors
  • Selectable Test Range of 100K~1G.

Add to quote


PDT800K Deluxe “Near -Fail” Combo Wrist Strap and Footwear Testing Station

Easy, accurate, and time-saving one-touch digital wrist strap and footwear tester with “Near-Fail” alert that tells you when you are nearing failing
More Info
  • “Near-Fail” LED Indicator.
  • LCD Readout Screen Gives Actual Test Result Number.
  • Tests Wrist only; Foot only; or Both Wrist and Foot.
  • 100% Independently Test the Left-Foot and the Right-Foot.
  • Selectable Test Range of 100K~1G.

Add to quote


Model 282CPS Charge Plate Monitor Convertor for 282 Static Meters

The 282CPS Charge Plate System is an accessory for the 282 Field meter that permits the 282 to measure ionizer performance. Increase the utility of your 282 Electrostatic Fieldmeter by adding the
More Info
  •  An accessory for the model 282 Fieldmeter that permits the model 282 to measure ionizer performance.
  • Lowest-cost test method for periodic verification of ionizers
  • Correlates closely to charged-plate monitor test results
  • Performs both positive and negative decay tests
  • Also works with Model 281

Add to quote


Model 287A Charge Plate Monitors to Test Ionizer Performance

The Model 287A is a low-cost and highly portable alternative to a charged-plate monitor for periodic verification of ionzer performance. It permits ionizer testing at the work location without the
More Info
  • All-in-One Instrument for testing Ionizers
  • Measures, displays and stores voltage, decay time, temperature and humidity
  • Exceeds current requirements of ESD Assn. SP3.3 for Periodic Verification of Air Ionizers
  • Test Balance and Decay
  • Low Cost / Performance Ratio
  • Hand-held, Battery Operated
  • Built -in Self Test

Add to quote


CM400 – Single Wire Continuous Monitor, One Operator Only

A single wire constant monitor for one wrist strap only. The CM400, single wire monitoring products continuously check the total ground loop, including the operator, the wrist band and the coil
More Info
  • Continuously Checks One Single Wire Wrist Strap
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


PDT700K – Near -Fail” Combination Wrist Strap and Footear Testing Station

Easy, accurate, and time-saving one-touch digital wrist strap and footwear tester with "Near-Fail" alert that tells you when you are nearing failing levels. What makes the PDT 700K
More Info
  • “Near-Fail” LED Indicator.
  • Tests Wrist only; Foot only; or Both Wrist and Foot.
  • 100% Independently Test the Left-Foot and the Right-Foot.
  • Selectable Test Range of 100K~1G.

Add to quote


CM410 – Single Wire Continuous Monitor, One Operator, One Workstation Mat

A single wire constant monitor for one wrist strap and one worksurface. The CM410 single wire monitor continuously checks the total ground loop, including the operator, the wrist band, the coil
More Info
  • Monitors One Operator and One Workstation Mat
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


GTS900K Premium Combination Wrist Strap and Footear Testing Station

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test
More Info
  • Tests both ESD wrists straps and ESD footwear such as shoes and heel grounders to determine if the grounding device is functioning correctly.
  • Split footplate design test both feet simultaneously and independently
  • Durable sleek black frame and molded footplate
  • Wrist Strap Range 750 kilohm –10 megohm
  • Footwear Range 750 kilohm – 100 megohm*
  • Gives both Low and High failure alarm modes
  • This tester fully supports the “Compliance Verification Plan” requirements as stated in the ANSI ESD S20.20.

Add to quote


CM420 – Single Wire Continuous Monitor, Two Operators, One Workstation Mat

A single wire constant monitor for two wrist straps and one worksurface.  The CM420, single wire constant monitor continuously checks two operators wrist straps and a workstation ground
More Info
  • Monitors Two Operators and One Workstation Mat
  • Easy To Use: Simply Plug In Wrist Strap
  • Audible and Visual Alarms
  • Factory Calibrated with Certificate – Does Not Require Recalibration

Add to quote


GTS600 Combination Wrist Strap and Footear Testing Station

The GST600 tester is a space-saving, versatile combo grounding tester that allows for accurate and cost effective testing of ESD ground devices. The GTS600 is the best value combination tester on
More Info
  • Provides accuracy and reliability at the best value
  • Dual test circuits: test footwear or wrist straps
  • Positive rocker switch LED’s lights and audible alarm signal test results
  • Battery powered with low-battery indicator
  • Provided with NIST traceable certificate

Add to quote


RangerONE Dual Wire Constant Monitor – Model CM1601

Dependable and accurate dual wire monitor for one person. The RangerOne is an extremely sensitive monitor that accurately measures the electrical resistance of an ESD wrist band and signals if the
More Info
  • Monitors one dual wire wrist strap
  • Uses resistance based monitoring technology
  • Easy to use and economical
  • Audible and visual alarm indicators

Add to quote


RangerTWO Dual Wire Constant Monitor – Model CM1602

CM1602-resistance-ranger-dual-wire-constant-monitor
Dependable and accurate dual wire monitor for one person and one work surface. The Resistance Ranger Series is the most reliable workstation monitoring system available. The extremely sensitive
More Info
  • Monitors one dual wire wrist strap and one worksurface
  • Uses resistance based monitoring technology
  • Easy to use and economical
  • Audible and visual alarm indicators

Add to quote


RangerPRO Dual Wire Constant Monitor – CM1600

Versatile, Dependable, and Accurate Resistance Based Constant Monitor System The RangerPRO constant monitor is the premiere workstation grounding system available. A continuous pulse of an
More Info
  • Monitors: Two wrist straps; Two work surfaces; Two auxiliary grounds
  • Accurate dual conductor resistance monitoring technology
  • Ultra-low voltage signal
  • Conductive ESD-safe case
  • Audible and visual alarms
  • Calibration certificate included
  • For use with Dual Wire Wrist Straps

Add to quote


RangerNET Dual Wire Constant Monitor – Model CM2815

A network read dual wire constant monitor for two people and two work surfaces with data logging capabilities Transforming Technologies' RangerNET constant monitor is the premiere work station
More Info
  • Monitors two dual wire wrist straps and two worksurfaces
  • Uses resistance based monitoring technology
  • Ultra-low voltage signal
  • Conductive metal case
  • Audible and visual alarm indicators
  • Network-ready for use in the Boss-See system

Add to quote


Warmbier PGT120.COM Combination Tester With Data Collection

A complete test station for ESD footwear and wrist straps with data collection The PGT120.COM personnel grounding tester takes quick and accurate resistance measurements of the ESD
More Info
  • A “Smart” ESD Combo tester that integrates with a computer to record test results into a database
  • Can work with many other devices such as door/barrier system, label printer, RFID and more
  • Independently test footwear & wrist strap grounding products
  • Automatically test footwear in hands-free mode
  • 100volt test circuit (by default) which is the same voltage used for qualification tests.

Add to quote


RangerBOSS Dual Wire Constant Monitor – Model CM2800

A network ready dual wire constant monitor for two people and two work surfaces with adjustable alarm limits, and data logging capabilities.  The RangerBOSS dual conductor workstation
More Info
  • Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage
  • Uses resistance based monitoring technology
  • Ultra-low voltage signal
  • Conductive metal case
  • Alarms are selectable with software
  • Network-ready for use in the Boss-See system

Add to quote


Warmbier PGT120 Combination Tester for Personal Grounding Equiptment

The PGT120 is an easy to use and complete test station for ESD shoes and wrist straps. The personnel grounding tester is able to perform a quick and accurate control measurement of the ESD
More Info
  • Quickly and easily test ESD footwear and wrist straps
  • Can test ESD footwear hands-free by just stepping on the footplate
  • Audibly and visually signal a “Pass”, “High-Fail” or “Low-Fail”
  • Tests both feet simultaneously and independently to save time
  • Can be integrated with turnstiles and other barrier systems.
  • 100volt test circuit (by default) which is the same voltage used for qualification tests.

Add to quote


CM2015 Periodic Verification Tool

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade
More Info
  • Periodic Verification Tool for the Resistance Ranger Constant Monitors
  • Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications
  • Resistor Box Containing 5% Fixed Precision Resistors

CM410PV – Periodic Verification Tool For CM400 and CM410

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a
More Info
  • Periodic Verification Tool For CM400 and CM410
  • Verfies that the constant monitor is in proper working order.
  • Factory calibrated.  No recalibration required.
  • Comes with Certificate.

Add to quote


CM420PV – Periodic Verification Tool For CM420

Transforming Technologies' constant monitors are designed to be adjustment free. Annual calibration is not necessary. If a quality program requires testing, verification tools that simulate a
More Info
  • Periodic Verification Tool For CM420 Constant Monitor
  • Simulates Passing / Failing Wrist Straps and Worksurfaces
  • The Tool Verifies That The Constant Monitors Are Working Properly

Add to quote


Resistance Ranger Metal Wrist Strap Remote Jack

Metal Remote Jack
Replace your plastic Resistance Ranger Constant Monitor wrist strap remote jack with a metal jack. Works with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from
More Info
  • Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor
  • More durable than plastic version

Add to quote


CP3000 parking jack for Dual Wire Constant Monitors and Wrist Straps

The CP3000 parking station for dual conductor wrist straps provides the user with a jack that will allow an operator to disconnect and leave the dual conductor cord at the workstation without the
More Info
  • Provides a jack to “park” your wrist strap when you need to leave the workstation
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

Add to quote


CYCLOPS operator presence sensors

The CYCLOPS will cause an alarm if an operator approaches the workstation without connecting their wrist strap CYCLOPS™ operator presence sensors, from Transforming Technologies, assure
More Info
  • CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor
  • Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap
  • Assure compliance with personnel grounding requirements and protect ESD safe workstations
  • Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

Add to quote


Translate »