Test Equipment

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Pocket-size meter
• Verify Ionizer with EFM51.CPS “Charge Plate Set”
• Evaluate ionizer efficiency
• Measure static fields, potentials, and discharge times

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Storage bag including ground cable and clip
• Pocket-size
• Verify Ionizer with EFM51.CPS “Charge Plate Set”

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Storage bag including ground cable and clip
• Pocket-size
• Verify Ionizer with EFM51.CPS “Charge Plate Set”

• Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
• Measures Voltage Generated on the Body While Walking
• Handheld, Portable Meter with Conductive Carrying Case
•  Also is a Fully Functional Field Meter – Measures Static Fields, Potentials and Discharge Times.

• Quickly and Easily Test Surface Resistivity & Static Fields
• Portable, Handheld Devices in a Lightweight Conductive Case
• Takes The Basic Measurements Needed for an ESD Program

• Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
• Measures Voltage Generated on the Body While Walking
• Body Voltage is Displayed on Meter as well as Live Via a Computer
• Easy to use Analysis Software to Save, Measure, Print and Export Tests

• Take Precise Temperature and Humidity Measurements
• One Button Operation
• Mountable: Built-in 1/4” Tripod Thread
• Temperature: -30…+70°C (± 0,5°C at -10…+70°C)
• Humidity: 0 … 100% (± 3% at 20…80%)

• Hand probe are designed to evaluate ESD flooring according to ANSI ESD20.20
• Made from rugged stainless steel
• Banana plug socket for connection to the testing meter
• Compatible with Surface Resistance Meters and Walking Test Kits

• Clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20
• Wide steel clamps ensures excellent contact with fabric
• Made from rugged stainless steel
• Banana plug socket for connection to the testing meter

• A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.
• Concentric ring with conductive rubber (R < 5 ohm) with silver particles
• Take resistance-to-ground, point-to-point and volume resistance measurements
• Include stainless steel plate, insulative plate, and a conductive carrying case

• Two-sided probe combines a concentric ring and disk probe
• Made with conductive plastic containing silver particles
• Take resistance-to-ground, point-to-point and volume resistance measurements
• Include stainless steel plate, insulative plate, and a conductive carrying

SR0065 5lb Surface Resistance Probes

• Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
• Test range: 10^3-10^12
• Stores test data that can be accessed via USB 
• Measures temperature and humidity
• Test voltage: 10V/100V(automatic ranging)
• Built-in resistivity probes
• Carrying case & calibration certificate included

• Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
• Test range: 10^3-10^12
• Stores test data that can be accessed via USB 
• Measures temperature and humidity
• Test voltage: 10V/100V(automatic ranging)
• Built-in resistivity probes
• Carrying case & calibration certificate included

Warmbier SRM110 Pocket Digital Surface Resistance Test Kit

• Perform resistance tests to evaluate items for ESD compliance
• Test range: Low ohmic range: 1 to 10 kOhm – 199 GOhm
• Comes with 5lb probe set with innovative extension handle
• Comes in conductive case with handle

• Ensures Excellent Contact During Evaluations of ESD Gloves
• Rugged Metal Probe
• 4mm Banana Plug Socket Connection
• For Use With Resistance Meters

Warmbier 900 Backrest Probe

• Easy-to-read color coded readout screen
• Two lightweight “Press & Test” travel electrodes
• Built in resistivity probes
• Automatic test voltage selector
• Carrying case

• Pocket-Sized Digital Surface Resistance Test Kit
• Test range: 10^3-10^12
• Test voltage: 10V/100V(automatic ranging)
• Accuracy + 5%
• Built-in resistivity probes
• Carrying bag

SR0055 5lb Surface Resistance Probes

• Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance
• 10v and 100v range voltage selection
• Automatic zeroing and power shut off
• Tests temperature and humidity
• Two 5 lb disk probes
• Built-in resistivity probes
• Carrying case

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

• Measure electrostatic fields
• Measure surface resistance
• Analyze ionizers performance
• Evaluate packaging materials
• Evaluate garments
• Measure flooring, work surfaces and furniture resistance
• Measure temperature and relative humidity

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

• Measure electrostatic fields
• Measure surface resistance
• Analyze ionizers performance
• Evaluate packaging materials
• Evaluate garments
• Measure flooring, work surfaces and furniture resistance
• Measure temperature and relative humidity

• Perform resistance tests to evaluate items for ESD compliance
• Test range: Low ohmic range: 1 to 10 kOhm
  High ohmic range: 1 KOhm to 1.2 TOhm
• Store up to 50,000 test values and create reports with included software
• Results displays on LCD screen
• Comes with 5lb probe set and hand probe
• Comes in conductive case with handle
• Tests Temperature and Humidity

• Combination static field meter and ion balance tester
• Four button operation
• Digital display with numerical readout and bar graphs
• Two LED guide ring lights help position the field meter
• Pocket-size
• Meets ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

• Verify ESD meters are calibrated and in proper working order
• Precision resistor box
• Passive – Does not require power
• Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others.

• Verify that the PDT700K and PDT800K combo tester are operating correctly.
• Resistance Box with Fixed 5% Precision Resistors
• Selectable Test Range of 100K~1G.

• “Near-Fail” LED Indicator.
• LCD Readout Screen Gives Actual Test Result Number.
• Tests Wrist only; Foot only; or Both Wrist and Foot.
• 100% Independently Test the Left-Foot and the Right-Foot.
• Selectable Test Range of 100K~1G.

•  An accessory for the model 282 Fieldmeter that permits the model 282 to measure ionizer performance.
• Lowest-cost test method for periodic verification of ionizers
• Correlates closely to charged-plate monitor test results
• Performs both positive and negative decay tests
• Also works with Model 281

Model 300 Charge Plate Monitors to Test Ionizer Performance

Model 288B Charge Plate Monitors to Test Ionizer Performance

• All-in-One Instrument for testing Ionizers
• Measures, displays and stores voltage, decay time, temperature and humidity
• Exceeds current requirements of ESD Assn. SP3.3 for Periodic Verification of Air Ionizers
• Test Balance and Decay
• Low Cost / Performance Ratio
• Hand-held, Battery Operated
• Built -in Self Test

• Continuously Checks One Single Wire Wrist Strap
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• “Near-Fail” LED Indicator.
• Tests Wrist only; Foot only; or Both Wrist and Foot.
• 100% Independently Test the Left-Foot and the Right-Foot.
• Selectable Test Range of 100K~1G.

• Monitors One Operator and One Workstation Mat
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• Tests both ESD wrists straps and ESD footwear such as shoes and heel grounders to determine if the grounding device is functioning correctly.
• Split footplate design test both feet simultaneously and independently
• Durable sleek black frame and molded footplate
• Wrist Strap Range 750 kilohm –10 megohm
• Footwear Range 750 kilohm – 100 megohm*
• Gives both Low and High failure alarm modes
• This tester fully supports the “Compliance Verification Plan” requirements as stated in the ANSI ESD S20.20.

• Monitors Two Operators and One Workstation Mat
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• Provides accuracy and reliability at the best value
• Dual test circuits: test footwear or wrist straps
• Positive rocker switch LED’s lights and audible alarm signal test results
• Battery powered with low-battery indicator
• Provided with NIST traceable certificate

WST200 – ESD Wrist Stap Tester

• Verify PGT120 ESD testers are calibrated and in proper working order
• Precision resistor box
• Passive – Does not require power

• Monitors one dual wire wrist strap
• Uses resistance based monitoring technology
• Easy to use and economical
• Audible and visual alarm indicators

• Monitors one dual wire wrist strap and one worksurface
• Uses resistance based monitoring technology
• Easy to use and economical
• Audible and visual alarm indicators

• Monitors: Two wrist straps; Two work surfaces; Two auxiliary grounds
• Accurate dual conductor resistance monitoring technology
• Ultra-low voltage signal
• Conductive ESD-safe case
• Audible and visual alarms
• Calibration certificate included
• For use with Dual Wire Wrist Straps

• Monitors two dual wire wrist straps and two worksurfaces
• Uses resistance based monitoring technology
• Ultra-low voltage signal
• Conductive metal case
• Audible and visual alarm indicators
• Network-ready for use in the Boss-See system

• A “Smart” ESD Combo tester that integrates with a computer to record test results into a database
• Can work with many other devices such as door/barrier system, label printer, RFID and more
• Independently test footwear & wrist strap grounding products
• Automatically test footwear in hands-free mode
• 100volt test circuit (by default) which is the same voltage used for qualification tests.

• Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage
• Uses resistance based monitoring technology
• Ultra-low voltage signal
• Conductive metal case
• Alarms are selectable with software
• Network-ready for use in the Boss-See system

• Quickly and easily test ESD footwear and wrist straps
• Can test ESD footwear hands-free by just stepping on the footplate
• Audibly and visually signal a “Pass”, “High-Fail” or “Low-Fail”
• Tests both feet simultaneously and independently to save time
• Can be integrated with turnstiles and other barrier systems.
• 100volt test circuit (by default) which is the same voltage used for qualification tests.

• Periodic Verification Tool for the Resistance Ranger Constant Monitors
• Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications
• Resistor Box Containing 5% Fixed Precision Resistors

• Periodic Verification Tool For CM400 and CM410
• Verfies that the constant monitor is in proper working order.
• Factory calibrated.  No recalibration required.
• Comes with Certificate.

• Periodic Verification Tool For CM420 Constant Monitor
• Simulates Passing / Failing Wrist Straps and Worksurfaces
• The Tool Verifies That The Constant Monitors Are Working Properly

• Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor
• More durable than plastic version

• Provides a jack to “park” your wrist strap when you need to leave the workstation
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

• CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor
• Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap
• Assure compliance with personnel grounding requirements and protect ESD safe workstations
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.